studding tires

[trxHRC450r]

i work at a dealership and i have acquired a full set of wheels and brand new take off tires.

are there studs that will work in yfz450 fronts and raptor 350rears?(brand new)

r there studs short enough for stock tires?

[cracer250]

If the tires have 90% or more tread, you'll be fine with using 3/8" studs. They won't penetrate all the way through.

[trxHRC450r]

someone has to know? anyone out there know if there are short studs that wont puncture the tire or do i need to buy tires with big knobs to stud?

[TRX250R87]

Get some 1/2" or 5/8" gold screws or kold kutters. As long as the tires are new, or almost new, you won't have any problems.

The more studs you put in , the better chance you will not lose any, and you will get better traction. Don't bother with 3/8!
ERIC

[ckasper18]

Depending what size quad your using go with the 5/8 put the studs in slow do not spin them in fast you will keep the studs in the tires a lot longer when you take your time dont use a high speed drill.

[trxHRC450r]

i guess i will try using 5/8th studs. i have heard i should use as many studs as i can in case they come out. thnx for all ur info. and maybe i will see some of u in lake george new york for the winter carnival?