steering stem and bars

[ImWhite]

my 400's steering stem is squeeking pretty bad,i tryed oil,im looking for a new 1 along with some bars,looking for a little higher than stock,i like tag bars but dont know which 1's to get....thanks for all of your help

[hardkoratvmxr]

get houser or burgard and some fatbars such as cr high bend or maybe even double high

[300ex13]

Originally posted by hardkoratvmxr
get houser or burgard and some fatbars such as cr high bend or maybe even double high

Charlie you said it^^ b/c thats what i would say

[400exstud]

I did a lot of research on stems and found Houser to make the strongest looking.

I got a +1 stem and Tag T2 Cr double high bars and it puts it at stock height. This is because the +1 stem is 1 inch higher and the Cr double high bars are 1 inch lower than stock. With this setup you can higher "ATV" style later if you want to.

for bars u should get long horn fat bar cr high. their pritty good bars for $40

[IrideMHSC]

yea i run cr high bends and a stock stem so my bars sit a little lower but i kinda like em

[Ridin' Jesse]

are you just buying a stem cuz it squeaks? im j/w cuz id save the money for other things maybe. But for stems, unless you have aarms, it doesnt matter much...if you have aarms, you should go with the same brand stem as aarms.