2001 416ex built in 05 for MX... 2900 or Trade for junk 450

[yamablaster24]

Well guys, im making the move because i have gotten everything from this bike. I just got done building it like 4 days ago and the motor absolutely rips. I just got done breaking it in and just topped off some Honda full synthtic. This bike was built to the wall with only the best. The motor is solid along with the entire bike. EVERYTHING was re-done on this..from PC to motor to all cables and rubber boots. I only want a 450 project or 450. No other 400's or Z's or anything. I dragged this against my buddies piped YFZ (jetted perfectly with no lid and filter ) and it was right next to it until he hit 5th. This bike HUALSS and it handles like no other. The shocks redone by GT thunder and i just got them perfectly tuned in for 160-180 pound rider on MX track. Let me know thanx

http://img.photobucket.com/albums/v634/yamablastermx/416ex027.jpg

http://img.photobucket.com/albums/v634/yamablastermx/snow416034.jpg

http://img.photobucket.com/albums/v634/yamablastermx/416ex028.jpg

http://img.photobucket.com/albums/v634/yamablastermx/416ex032.jpg

[G Impala 63n70]

Hey guys, i rode this quad and can vouch, that it is faster than most 400s, and very reliable, suspension is perfect.:blah:

[300exr]

hey dude theres a wrecked 2004 yfz 450 on ebay for pretty cheap, i just thought you might be interested.

whats that link for the junk yfz?

[G Impala 63n70]

that guy is 10 minutes from my house. Thats why i want to sell ASAP

[sdstevens22]

how close are you located to indiana?

[dancap]

Not to be a dick, but is it me or is this frame destroyed! Unless that alignment is THAT bad, but to be it looks as if the frame is bent as you look closely at the picture below, it shows the right side tire is lower then the left~

http://pic16.picturetrail.com/VOL683/2960476/6446221/121493627.jpg

[8my_Cash]

nah his bars are turned in the picture and the tie rods might be out of adjustment but its not a bent frame lol

[G Impala 63n70]

Dancap, go **** your self you its not even your bike you dont know whats with it, that was a really unneeded post, seeing that i have fixed the alignment, and well besides the facts the frames not bent, you just have no business saying something like that in my thread where im trying to sell something im sorry you cant sell your z400 dont take it out on other people.

Anywhoo. Im not to far from indiana, come and get it!

[Hyperwarrior22]

would you take 2500?

[yamablaster24]

umm Pm me

[zforcefx]

Originally posted by dancap
Not to be a dick, but is it me or is this frame destroyed! Unless that alignment is THAT bad, but to be it looks as if the frame is bent as you look closely at the picture below, it shows the right side tire is lower then the left~

http://pic16.picturetrail.com/VOL683/2960476/6446221/121493627.jpg

What a homo why are you tryin to ruin this guys thread...

[dancap]

Originally posted by G Impala 63n70
Dancap, go **** your self you its not even your bike you dont know whats with it, that was a really unneeded post, seeing that i have fixed the alignment, and well besides the facts the frames not bent, you just have no business saying something like that in my thread where im trying to sell something im sorry you cant sell your z400 dont take it out on other people.

Anywhoo. Im not to far from indiana, come and get it!

its now a z434 with lsr axis front and rear long travel set up.. bike has 12k invested... pics will be up in the next few weeks.. why would i sell it if it out runs modded 450's !

[localmxboyz66]

ill have to agree it does look like the front of the quad is bent , just from turning the wheel would make the hole side lower it would just turn the tires like its suppose to

[4stroke4ever400]

you guys might want to get your eyes checked or lay off the drugs. if you dont think that it is bent they u are blind becasue either the frame is bent inward on the bac a-arm mount on the right side or the a-arm it self is bent. and he dont trying to ruin the post its more like he helping out cause i wouldnt want to buy a quad that f*cked up

[dancap]

This picture might be a little easier to exclaim that its not just the alignment. The top heim joins that connect the upper a-arms to the frame on a normally straight frame are perfectly even. As shown in the pic below the frame is tweaked to the right or the right a-arm is bent. Thus concluding in my last post. I am not hurting anyone here, if anything i am warning a potential buyer. And obviously g-impala(blaster's friend) is hiding something, by his tone of attitude towards my last post, he became very offensive, thus making me feel something really is wrong and they are covering it up.

http://pic16.picturetrail.com/VOL683/2960476/6446221/121596688.jpg

Once again look closely the left side the line goes directly through the middle of the heim joint and on the right side it doesnt even touch the top of the heim joint. Also even if the alignment is ***** the heim joints should still line up perfectcally!

[localmxboyz66]

4 stroke i think ur on our side with the frame being bent but idk cause u cant write cause i couldt understand wat u were trying to say

[4stroke4ever400]

Originally posted by localmxboyz66
4 stroke i think ur on our side with the frame being bent but idk cause u cant write cause i couldt understand wat u were trying to say
ya i edited it so maybe it more clear.

[AtvKid4Eva]

Originally posted by dancap
its now a z434 with lsr axis front and rear long travel set up.. bike has 12k invested... pics will be up in the next few weeks.. why would i sell it if it out runs modded 450's !

Wow dude u r such an A**hole for totaly ruining this thread. Y do u care so much its not urs it never will be and it dosent concern you at all! And you know it all the frame must be bent i bet you even know where it is bent and how it happened. you r just makin yourself look bad tryin to make yamablaster look bad so i hope ur happy. you r such a jerk and dont be mad cuz the kids got a honda and u ride a SH**Zuki!!:blah:

[440ex kid]

This picture might be a little easier to exclaim that its not just the alignment


Actually you cannot conclude that it is bent just by a picture. I agree that the heims should be in line if some things are true. The picture is not directly on. Therefor you cannot conclude that they are not straight. The only true way to know if it is bent is to see it, not analyze a picture of it. I would have to see it in person before I ruin a post like this, but hey isnt that what good buyers are suposed to do in the first place?

[yamablaster24]

well i didnt exactly use a tripod with a level on it to take this picture. Either way the frame isnt bent but if no one wants it i guess ill keep the beast.

[z400guy]

guys theres nothing wrong with this quad i dont even know yamablaster24 but dancup, your not taking in the angle of the fourwheeler and how its setting on the garage floor, you dont take a straight line and go across, of course thats going to make it look off because the fourwheeler isnt sitting parallel with say the garage door lines in back of it. so this is what i did and to me this should prove the quad is not bent.

http://i8.photobucket.com/albums/a39/m_cox22/quadpic.jpg

i could be wrong, i dunno??????????

[z400guy]

http://i8.photobucket.com/albums/a39/m_cox22/quadpic2.jpg


well maybe dancup is right, not trying to ruin your thread or anything just thought i would give my point of view on things, the last photo i just took straight line from your quad, like nerf bars and front bumper

alot of it is camera angle and how the handlebars are bent, my suggestion is to get another pic that shows everything is straight?

[dancap]

Im not being an ***, i stated what is simply noticeable, in the quad THE RIGHT SIDE LOOKS LOWER. and if you look in my first post i said to me it looks like a bent frame, keyword being TO ME, i never said it was totally right, i stated my opinion. this quad does have nice parts i do admit, but also for the guy two posts above, i dont see ANY 400ex's in a national race. I do love honda, i even wanted to trade for a 450r, at one time but now having a feshly built LONGTRAVEL Z434, im good now.

As z400guy, stated i could be right i could be wrong.. fix your alignment and get a better picture, then we will see!

Until the the frame still looks bent to me, thus throwing your alignment off, i once had a bent frame, and it was almost impossible to get the alignment perfect.

[localmxboyz66]

yea just get it in ur head ur quad is bent and u dont want to admit it so u might as well just give up on selling it (junk)

[wilkin250r]

Listen up.

First off, there is nothing at all wrong with dancap's first post. He explained what looked to HIM like a problem for an unsuspecting buyer. He didn't accuse the seller of outright fraud, he was just pointing out an observation he felt was important. Nothing wrong with that.

At that point, its up to the seller to reassure potential buyers that the frame is NOT bent, and possibly provide proof. If the frame truly isn't bent, then the buyer has nothing to worry about.

If the frame IS bent, and the seller was not aware of the problem, then he certainly appreciates the "heads up".


However, flaming is NEVER allowed. Replies such as "Dancap, go **** your self " and "What a homo why are you tryin to ruin this guys thread" are completely unacceptable.

[4stroke4ever400]

Originally posted by wilkin250r
Listen up.

First off, there is nothing at all wrong with dancap's first post. He explained what looked to HIM like a problem for an unsuspecting buyer. He didn't accuse the seller of outright fraud, he was just pointing out an observation he felt was important. Nothing wrong with that.

At that point, its up to the seller to reassure potential buyers that the frame is NOT bent, and possibly provide proof. If the frame truly isn't bent, then the buyer has nothing to worry about.

If the frame IS bent, and the seller was not aware of the problem, then he certainly appreciates the "heads up".


However, flaming is NEVER allowed. Replies such as "Dancap, go **** your self " and "What a homo why are you tryin to ruin this guys thread" are completely unacceptable.

finnaly someone with some sense

[dancap]

Originally posted by wilkin250r
Listen up.

First off, there is nothing at all wrong with dancap's first post. He explained what looked to HIM like a problem for an unsuspecting buyer. He didn't accuse the seller of outright fraud, he was just pointing out an observation he felt was important. Nothing wrong with that.

At that point, its up to the seller to reassure potential buyers that the frame is NOT bent, and possibly provide proof. If the frame truly isn't bent, then the buyer has nothing to worry about.

If the frame IS bent, and the seller was not aware of the problem, then he certainly appreciates the "heads up".


However, flaming is NEVER allowed. Replies such as "Dancap, go **** your self " and "What a homo why are you tryin to ruin this guys thread" are completely unacceptable.

Exactly thank you, as he exclaimed it was simply awareing others of my observations, no harsh comeback were necsesary.

[theTman]

hate to break it to you...your frame is bent..unless your floor is uneven

[Hyperwarrior22]

i pmed you

[jared_scarboro]

hey man whats the lowest u will take

[yamablaster24]

I have a brand new RPM axle on the way thats 480 dollars. So ill take 2900 for it now Bottom dollar, or 2750 without axle

[Hyperwarrior22]

email a mods list and more pics to tlong80@gmail.com

im interested

[rmz250]

http://www.exriders.com/vbb/showthread.php?s=&threadid=184349

Is this quad a 1999 or a 2001. Not only do you have negative feedback your lying now.

[4stroke4ever400]

Originally posted by rmz250
http://www.exriders.com/vbb/showthread.php?s=&threadid=184349

Is this quad a 1999 or a 2001. Not only do you have negative feedback your lying now.

damn you just keep gettin caught.
i think it might be time for you to lay low or make a new name

[rmz250]

Originally posted by yamablaster24
I have a brand new RPM axle on the way thats 480 dollars. So ill take 2900 for it now Bottom dollar, or 2750 without axle

Brand new? http://www.exriders.com/vbb/showthread.php?s=&threadid=179872&perpage=15&highlight=yamablaster24&pagenumber=3

[yamablaster24]

2001 motor, sold old 99 motor and got this 2001 from rafikie...

axle has 6 rides on it virtually brand new

[rmz250]

Don't say you its brand new and cost you 480 $. The motor doesn't determine the year. The frame does. really this quad is a '99.