PARTS-powermadds, acerbis, and more

[ridered54]

Ive got some parts im looking to sell or trade... everything is for a 400ex (all came off an '02) unless it says otherwise. Powermadds and Acerbis handgaurds should fit anything and everything, handlebars are stock 7/8" and should fit any quad, bar clamp is stock 7/8" and will at least fit 400ex and 300ex. I can take measurements on the stuff to see if it will fit your quad. Here's what i got:

-stock skidplates, beat up with rust, some dents, and gash in the swinger plate- $5 plus shipping
-stock slip on exhaust (end cap bolts broke off so the bolts are stuck in the pipe, other than that its in good condition)-- make offer

-stock levers (clutch and front brake), silver, look like new- $15 shipped for both and $10 obo shipped for one

-stock bars with worn grips on em -- make an offer

-stock tool carrier in good condition but missing the end lid thing, also the bolt holes are torn and stretched (not sure how that happened or if i have mounting bolts) -- make offer

-beat up 250x (will work on 300ex too) axle that isnt in the best looking condition but should work fine (bearing rides are the only thing that may be wrong with it but they dont look terrible)-- make offer, will let go cheap but shipping may be expensive as its not light

-parking brake cable/assebly -- $5+shipping OBO

-slightly tweaked stock front bumper -- $5 plus shipping

-stock pegs -- $10 plus shipping OBO

-7/8 renthal atv bend bars without the crossbar- make offer

-almost brand new 300ex dg v-pro front bumper- make offer

make some cash offers for this stuff or i will take trades for aftermarket 400ex parts, or rear brake rotor, may also take trade for extra wheels and tires that are honda bolt pattern and no less than a 20" rear tire (anything from 400ex, 300ex, 450r, 250ex, 250r, z/kfx/dvx 400, or any other with honda bolt pattern, may consider stock tires from 400 or 450, let me know what youve got)...


---ive also got lots of sponsor stickers, ill throw some in if you buy something if you would like, i have some from basically every company you can think of

ill consider trades for any quad parts (dont need to be 400ex) so let me know what you got

[ridered54]

exhaust

[ridered54]

skid plate (worst damage shown)...can get pics of other stuff on request, so let me know what you wanna see

thanks,
dan

[ridered54]

would be interested in trade for 400ex stock heel gaurds and possibly other stock parts too... make trade or cash offers for this stuff

[Chino886]

Originally posted by ridered54
would be interested in trade for 400ex stock heel gaurds and possibly other stock parts too... make trade or cash offers for this stuff

Hey Dan,

I have the stock heelguards, I will trade you for the powermadd's, I will include them w/ the nerfs...

[ridered54]

im still not sure what im doing with the powermadds... i will know for sure after christmas, but until then im gonna hold on to them unless i get a really good offer for em. I pmed you about the nerfs.

Thanks,
Dan

[ridered54]

bump... make some offers, will let all stock 400 stuff go cheap, will keep origninal post updated with new stuff for sale, etc.

send me some interesting trades (would love any universal quad parts that fit nearly anything, handgaurds, bars, etc.)

[ridered54]

... all still for sale

[A A R O N]

how much for the acerbids shipped to ohio.....by the way, your mailbox is full

dan...$35 like ya said..we got a deal? bring them tomorrow to school if you can. oh yeah, do you have any grips like u said u had...if so, i'll buy the grips and handgaurds for $40 or whatever...u got my email

[ridered54]

Originally posted by -A²-
how much for the acerbids shipped to ohio.....by the way, your mailbox is full

make an offer... quad&dirtbike you have an email

i also cleaned out my mailbox..

[A A R O N]

30 shipped?

[ridered54]

Originally posted by -A²-
30 shipped?

i already have an offer for $30 and possibly $35 without shipping, so unless you can do better, im proably gonna sell them to this guy

-dan

will pay $40 total for stock slip and acerbids. i came come pick them up ;) oh yeah and would the stock slip on fit my 250? would it do anything for it and will i have to rejet it? trade for my stock tires??

[ridered54]

pmed

bump...consider the acerbids sold

[ridered54]

back to the top... make some offers (cash or trade)

thanks

[Chino886]

hey,

I still got those 9" douglas wheels.....

[ImWhite]

i have sotkc heelguards,1 side cracked off in the middle top part...hard to explain thats all that is wrong with them...will trade for acerbis....let me know if u want any money as well.thanks,o yea ill try n get pics this weekend iof u want

[ridered54]

acerbis might be gone in trade for stock honda rear rims and tires... so ill have to wait and see what happens before i get back to you both.

chino you have pm

[ridered54]

wont know about acerbis trade until after the holidays

[ridered54]

quad&dirtbike you have a pm

[ridered54]

powermadds are not for sale... along with t2's

original post has been updated accordingly

[ridered54]

parking brake assembly with cable has been added-- check original post

looking for a bumper to replace my tweaked 400ex one...will trade or buy one so lmk what you got (aftermarket, stock 450r, maybe stock 400ex, ...)

[ridered54]

would be very interested in trading stuff for a stock 450r bumper.. maybe other aftermarket ones too

[brandon34r]

here is the bumper on my 400...and here is a close up that i did on my grab bar

[brandon34r]

..........

[ridered54]

i am looking for a black 400ex seat cover and will take trades for one (preferably all black gripper, but any black covers will be considered)


make some offers...


also have a tweaked stock 400ex bumper for sale (im thinkin around $5 plus shipping)

original post updated

[ridered54]

stock pegs added to original post--- 10 plus shipping OBO

[HiZ]

I want the POwerMadd's and the Acerbis handguards!
Have $$$ ready let's talk need them asap!

theomnij@hotmail.com

[ridered54]

email sent

[HiZ]

where's my email?
let me know on the handguards, please

[ridered54]

im pretty sure i sent one out...

anyway

the powermadds arent for sale but the acerbis are so make an offer for them

[ridered54]

jsut checked and the email was sent but ill pm you what it said

[ridered54]

bump

hiz please get back to me

[HiZ]

Free bump
sorry for the delay, busy the past few days! PM sent

[ridered54]

i didnt get it, my pm box isnt full as im getting pms from other people, so please try to send it again

thanls,
dan

[ridered54]

HIZ... still no response, please get back to me

[HiZ]

sorry for the delay
I was out of town
They were for my sled
and now that I am back
and my sled is in pieces
because while I was gone
It got smashed up
because somone else decided to ram it
at a high rate of speed
I have to fix that now
But I may have someone interested in them
let me check

[ridered54]

alright thanks

good luck with gettin it back to together

[stumpleg]

Acerbis handguards still for sale? How much are you asking?

[ridered54]

still for sale

looking for 35 shipped bottom dollar

[stumpleg]

These mount right up? or do they need a mounting kit? PM me, very interested.

[ridered54]

pmed u awhile ago... please get back to me

[crombie6guy]

wnat powermadds!!!

[ridered54]

sorry theyre not for sale anymore.... i decided to keep em

[ridered54]

stock red 400ex seat cover... make an offer

[ridered54]

...original post updated

[ridered54]

sale pending on Acerbis handgaurds

[ridered54]

acerbis handgaurds SOLD

original post updated

[ridered54]

Clymers Service manual SOLD

[ridered54]

im looking for nerf bars for a 400ex so ill trade any of the parts i have left for a set or maybe buy them

[440 00]

i have a set of 450r heeguards for 20.00 shipped

[ridered54]

are you interested in trading for anything?

and do you know if they will bolt up on a 400ex?

[ridered54]

i now have these parts for a 300ex for sale (the original post will be updated)

-complete stock exhaust
-stock handlebars
-almost brand new dg v-pro front bumper
-stock front bumper

make offers for parts

[polcat1p]

will the exhaust fit a 250x?
If so i can give $30 shipped

[ridered54]

yes it will fit a 250x, and ill pm you about the price

thanks,
dan

[ltzblaster]

if the footpegs are stil for sale ill give you 7 bucks shipped

[ridered54]

i think it might cost that much to ship them... so ill check on shipping and let you know, but you probably have to go a little higher than that

[ltzblaster]

alright i just want some footpegs to weld to mine to make them wider i think i might have found another set that my cousin has i will get back to you on tuesday :)