PDA

View Full Version : 499ex Wiseco 4mil Stroker & JE UL 89mm Stroker Piston


mikeboone
12-08-2005, 07:37 PM
Crank was bought new just a few months ago and JE piston bougt new from Trinity. Crank is the Wiseco 4mm stroker crank w/ hotrod and was $425 new. Piston is JE Ultralight 89mm in 12:1 an was $245. Sell all for $400 shipped incl counterbalncer and both main bearings. Paypal-Money order-Cash Check. *You will eed to have cylinde sleeved and bored to 89mm. If you have 89mm now this whole setup will drop right in. I do have my complete cylinder setup bored to 89mil now for $250 shipped as well. Bore and stroke together will make your bike a 460cc. Super low and midrange!
http://www.imagestation.com/picture/sraid196/p941eff1cb88d42dd5a3472122c156199/f122a686.jpg http://www.imagestation.com/picture/sraid196/pe403f9e63192bb0b070a4cabaf5a6739/f122a5db.jpg http://www.imagestation.com/picture/sraid196/pd1fcac3985981a7883745f540ee7b68c/f122a53b.jpg
Chino886
12-08-2005, 07:45 PM
Originally posted by mikeboone
Crank was bought new just a few months ago and JE piston bougt new from Trinity. Crank is the Wiseco 4mm stroker crank w/ hotrod and was $425 new. Piston is JE Ultralight 89mm in 12:1 an was $245. Sell all for $400 shipped incl counterbalncer and both main bearings. Paypal-Money order-Cash Check. *You will eed to have cylinde sleeved and bored to 89mm. If you have 89mm now this whole setup will drop right in. I do have my complete cylinder setup bored to 89mil now for $250 shipped as well.
http://www.imagestation.com/picture/sraid196/p941eff1cb88d42dd5a3472122c156199/f122a686.jpg http://www.imagestation.com/picture/sraid196/pe403f9e63192bb0b070a4cabaf5a6739/f122a5db.jpg http://www.imagestation.com/picture/sraid196/pd1fcac3985981a7883745f540ee7b68c/f122a53b.jpg

Hey Mike,

PMed you, did you get a new 450R for dragging?
mikeboone
12-08-2005, 07:57 PM
Originally posted by Chino886
Hey Mike,

PMed you, did you get a new 450R for dragging?

Nah, I bought my ESR 330 motor back and building another R. I want to get away from 4 strokes for awhile.
djprettyrick
12-09-2005, 02:36 PM
pm sent
12-10-2005, 01:50 PM
does the cylinder bored to 89mil come with the piston?
mikeboone
12-10-2005, 02:28 PM
No, cylinder bored to 89 is cylinder and tensioner only.

$600 will get it all shipped to your door: Cylinder, Piston, and stroker crank.

Parts work best low-Mid with about same topend power as good 440. Amazing low end torque!
12-10-2005, 02:32 PM
so for 600 it will mount up no problum or is their still more i have to do to get it to work.
mikeboone
12-10-2005, 09:12 PM
Yes it is ready to bolt up; no other parts required.
djprettyrick
12-14-2005, 02:03 PM
is the kit still available?