3000 dollars

[Built_300EX]

By the end of march I will have spent 3000 dollars on just quad parts for my 300EX. I am going to go with a stage 3 webcam, 330 FST big bore kit, big gun rev limiter(+1200 RPM), much larger valves, oil cooler,
Also, here is some other things I plan to get, if you see anything I miss, tell me.

Lonestar swingarm, Lonestar axle +2, Lonestar carrier, Powder coated frame (pitch black with metallic flake), all near bearings throughout the rolling chassis, Armidillo + 2 a-arms, firestar wheel hubs, (beadlock rims don't know which kind yet), and some other things. Anything you see that is a definate need tell me.
I am getting some other things for Xmas so I left them off of this list.

[trX250eXmXr28]

dont get armadillo aarms... if u want aarms and wanna spend 460... save 10 bucks and get +3 burgurds

[300ex73]

If you're looking to get some suspension, you may talk to kyleschonert. I think he's gonna try to sell his Elkas and Burgard +2's

[bwamos]

Also make sure that rear swingarm is a +2, not stock length.

If you're replacing the rear suspension anyway.. could look at the 350x swinger. +1-3/4 I beleive (could be off here) powdercoat it, and get a shock custom setup for it. Should save you a couple hundred dollars.

Most would agree to go with an RPM axle. DuraBlues are too brittle, and lonestar occasionally has some hub issues. RPM or LS should both be good for a 330ex though.

[300ex13]

find a 2001 raptor rear shock...makes world of difference over the stocker and will saved me like $300 over a works quadstar

[hardkoratvmxr]

for a-arms get gdh +3 lts they are approximately 550 and use 400ex length shocks with no relocater. and like 300ex73 said kyleschonert is selling chrome burgard +2s and elka suspension with piggy back rezzys for around 550 i think