How Does The 416 kit do???

[Elyk]

I am wondering, How much is the 416 kit? And is it true that when you put it on it will keep up with the 450's.

[yamablaster24]

I have one in my 416 while i have no dragged it or rode it much, i do know it has a butt load of power and will accelerate right with a stock 450. Mine also has a lot of other stuff but is only 416cc

[Elyk]

What was the final cost??? Is there a website I can Read about it on.

[rippin2]

i have a 416 kit in my 400 it accels better then the 450 in a drag but u have to change the rear sprocket to get more top end cause thats wen it comes back

[jons426ex]

hey...i have done many 416 kits..my buddy has a 440ex with sparks...ht cam...ect....in a straight line the 416 will catch it....the 440 is great in and out of corners because of the power......the 416 is a great all around kit.....you can get a 416 for around $300...if your searious about wanting a 416 i can get it done no problems.....my buddy works for hellbound racing...has his own machine shope and parts on hand....letme know...thanx..jon

[Elyk]

thanks for the offer but I live in southern California.

[F-16Guy]

Golden west cycle has the piston, gaskets, and cam for a little over $300. You'd just need to have the cylinder bored. Honestly, though, I'd probably rather piece it together on my own. That way, you can get the better laminated steel head gasket, the brand of piston you prefer, and you might save a few bucks if you shop around.

[Colby@C&DRacing]

we sell the piston cam and gaskets for $286. you will see a big difference in power with a 416 kit if you use the correct parts. My wifes 416 was even with a piped YFZ. (keep in mind she doesn't weight as much as most guys)

[stc416rider]

where is the hellbound shop at

im lookin to get a 416 2

[Joe400ex]

i was talking to a race shop by my house and they said that they could do a 416 with a port and polih with any kind of hotcam i want instalation and everything for 600 is that to much

[dunes_rider]

guys i dont know about 416 everything, but if i want my ex to be

416 what should i buy ???:confused:
Hotcam and bigbore or what ??

[Elyk]

I just got a quote from Motorworld of Elcajon and they said with everything for a 440 kit is 1100 dollars. Would it just be better to buy a 450? Or is the 440 going to go faster than a 450??

[dariusld]

Originally posted by Colby@C&DRacing
we sell the piston cam and gaskets for $286. you will see a big difference in power with a 416 kit if you use the correct parts. My wifes 416 was even with a piped YFZ. (keep in mind she doesn't weight as much as most guys)

MY 416 has trouble with stock yfz's, and its no slouch:rolleyes:
There is no way I'm going to keep up with a piped one. Your wife must be riding one fast 416.

[dariusld]

Originally posted by Elyk
I just got a quote from Motorworld of Elcajon and they said with everything for a 440 kit is 1100 dollars. Would it just be better to buy a 450? Or is the 440 going to go faster than a 450?? Motoworld is no place to be getting any kind of quote for anything.
A 416 is much easier than a 440. If want be fast get the 450, if want to have fun and have extra cash in the bank get the 416. When I'm riding in the dunes, I keep up with all the fast bikes. And stick pretty close up the hills. But at the sand drags I win some and lose alot.