serious blaster problems!

[jb123blaster]

Ok im just going to cut right to the problem. I accidently dropped a spray nozzle into the spark plug hole (like the ones that come taped onto the WD-40 cans). And the bike got pushed in gear so the piston moved. So i took of the top and bottom end off and it's nowhere to be found. So im guessing it's in my crank....What will it do if i run my bike with this peice of plastic in it. Will it ruin anything. Im not going to run it but i just want to know. Thanks

[Blaster x]

Melt it?

[zeppelin]

i really think its probably lying around your garage floor some where, if you are positive its in there (which im 99.9%sure that it is not because there is no way for it to fall off of your piston into the bottm end with everything together) the either just shake it upside down until it comes out or pour some gas in through the top of the case and let it drain out and maybe the nazzle will flow out with it. and if you do the last one flush it with some oil before you fill it up.

[bradley300]

it could be in the exhaust, which shouldnt be too horrible, it should blow out