djohansen05
11-28-2005, 08:50 AM
What about engine mods? what are the simplest/cheapest things to do and implements to the biggest gain?~ for GNCC racing
Nick110
11-28-2005, 06:35 PM
pipe, air filter, and jets if u dont have em already.
then it goes into Piston. High comp. or standard.
cam, rockers, valves
Port and polish
bore 406, 416, 426, 440, 460, 505,
then u can get real deep in it and get it stroked and other stuff.
JDiablo
11-28-2005, 06:39 PM
For your setup i would go with a
Hotcams stage one
Je 10.8:1 piston on a stock bore or a 416
A heavier flywheel maybe 6 oz's
Hinson clutch basket
Sparks 8 plate clutch
Magura hydrolic clutch
Port and a slight polish
And you will be one mean GNCC machine
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.