TravEX
06-24-2002, 06:17 PM
2 questions:
1) When i was putting my K&N jet kit in i had a problem with the needle jet part, i got to it ok, and got the screw out of the slide lift arm and tried to unscrew the 2 screws on the needle plate, they were in there so tight i didn't want to risk stripping them trying to get them out,,,I went with the 170 main jet per the instructions (my altitude is less than 1000 ft) and it runs fine,,,,my question is, is it imperative that the needle jet be changed with this kit?
2) I ditched the stock wheels and tires and bought Holeshot XC's on Douglas .190's, when i went to put them on i noticed that the lug holes were a tight fit on the lug bolts, so i put the lug nuts on with the flat side against the wheel (cause the tapered in just digs into the wheel and doesn't center the wheel on the lug bolt), and after riding i noticed that the wheel wobbles up and down cause it's not centered on the hub,,,do i need to get a smaller size lug bolts and nuts to get the wheels to center, or do i need to have the lug holes drilled out?
Thanks in advance for the help,,,,
Trav
1) When i was putting my K&N jet kit in i had a problem with the needle jet part, i got to it ok, and got the screw out of the slide lift arm and tried to unscrew the 2 screws on the needle plate, they were in there so tight i didn't want to risk stripping them trying to get them out,,,I went with the 170 main jet per the instructions (my altitude is less than 1000 ft) and it runs fine,,,,my question is, is it imperative that the needle jet be changed with this kit?
2) I ditched the stock wheels and tires and bought Holeshot XC's on Douglas .190's, when i went to put them on i noticed that the lug holes were a tight fit on the lug bolts, so i put the lug nuts on with the flat side against the wheel (cause the tapered in just digs into the wheel and doesn't center the wheel on the lug bolt), and after riding i noticed that the wheel wobbles up and down cause it's not centered on the hub,,,do i need to get a smaller size lug bolts and nuts to get the wheels to center, or do i need to have the lug holes drilled out?
Thanks in advance for the help,,,,
Trav