PDA

View Full Version : 450R pep rear shock


steveatv3
11-25-2005, 04:11 PM
Looking for a Pep rear shock for a 450R
quadmx791
11-27-2005, 09:29 PM
What swingarm and link are you running? Looking for new or used? I can get you new. Let me know if you are interrested.
steveatv3
11-28-2005, 09:45 AM
+1 1/4 swingarm and stock style linkage, how much can u get me them new?
quadmx791
11-28-2005, 11:24 AM
$1000.00 dual rate with 8-click large bottle rezzy. Brand New
$895.00 single rate with 8-click large bottle rezzy. Brand New
R3Concepts
11-28-2005, 07:00 PM
Originally posted by quadmx791
$1000.00 dual rate with 8-click large bottle rezzy. Brand New
$895.00 single rate with 8-click large bottle rezzy. Brand New

But can you get them from Wayne or Mark in 4 days is the question??
steveatv3
11-28-2005, 07:18 PM
I really dont care how long it takes to get to me because my quad is all torn apart. I was looking for a good used one around 600?
R3Concepts
11-28-2005, 07:41 PM
You may find a 20 click for 600 but doubt an 8 click for 600.
steveatv3
11-28-2005, 08:20 PM
is there a big difference?
quadmx791
11-29-2005, 01:49 PM
I can get one in 7-10 days
R3Concepts
11-29-2005, 03:38 PM
Most people wont outride a 20 click shock..The 8 click is nice because one click on compression is a very noticable difference, and its nice having that much adjustability, and say others ride your bike it will come in very handy...

With what you are trying to do by running the stock link, you need to run the dual rate rear shock..The single rate is intended for the BMS link..The dual rate is more expensive, but comes out to be about the same, if you were to buy the single rate and PEPs linkage. Both ride about the same..The BMS link adds a little show to the bike if your into that.
steveatv3
11-30-2005, 04:18 AM
how much for that link alone?
steveatv3
11-30-2005, 07:16 AM
I can get a pep 8 click rear from my buddy for a 250R that measures 16" from eye to eye i have my 450r elka that is 14" eye to eye could i get a long travel linkage that would make this work?
R3Concepts
11-30-2005, 04:57 PM
I dont think the 250r rear shock will work..The 450R rear shock I beleive comes in at about 15 inches center to center..The BMS link is like 200 I think.
400exrider707
11-30-2005, 05:27 PM
Originally posted by R3Concepts
I dont think the 250r rear shock will work..The 450R rear shock I beleive comes in at about 15 inches center to center..The BMS link is like 200 I think.

I think the stock 450R rear is even shorter than 15" Its closer to 14" I think
R3Concepts
12-01-2005, 03:53 PM
Originally posted by 400exrider707
I think the stock 450R rear is even shorter than 15" Its closer to 14" I think

The aftermarket shocks for stock style linkages are from 14.75 to low 15s.