PDA

View Full Version : Brakes



exx400
11-23-2005, 02:15 PM
the brakes on my 400EX are all messed up

im not sure what the problem is....my front brakes stick in one spot....they also dont spin very freely all the way around the rotor....im not sure if this is a rotor problem or a caliper problem....what should i do?

the front brakes are all stock



Thanks, Mitch

yamablaster24
11-23-2005, 02:20 PM
take front wheel off and spin hub. Then take off the caliper and check pads for a rock or piece of mud. If its clean your rotor needs replaced.

quad2xtreme
11-24-2005, 05:05 PM
Also perform these checks:

1) hold a screw drive against two points of metal on the bike so it is steady. Place it very close to the rotor. Spin the rotor. If it hits your screwdriver in some spots and not others, then you know the rotor isn't perfectly straight.

2) You can do the same to tell if your rims are bent.