PDA

View Full Version : Block off installed.. Problem



D12
11-18-2005, 08:17 PM
I removed all my parking brake hose... installed my WB block off.. now i have a problem... oil leak coming between the galiper itself and the block off...

after seeing this..

i removed the block off.. cleaned the galiper and block off surface with brake cleaner, reinstalled the block off and torqued it 1/50 turn before the bolt break... i bought a sealer that i put on the block off surface... still leakin!!! now i don't know what i can know

ReconRider25
11-18-2005, 08:20 PM
if thats leakin u need to rebuild ur caliper cuz u shouldnt have fluid comin outta there. silicone will work tho to seal it up...

Chino
11-19-2005, 01:05 PM
Originally posted by D12
I removed all my parking brake hose... installed my WB block off.. now i have a problem... oil leak coming between the galiper itself and the block off...

after seeing this..

i removed the block off.. cleaned the galiper and block off surface with brake cleaner, reinstalled the block off and torqued it 1/50 turn before the bolt break... i bought a sealer that i put on the block off surface... still leakin!!! now i don't know what i can know

galiper :eek2: :rolleyes: where exactly is the galiper located, I may need to check mine to see if it needs replaced :confused:

D12
11-21-2005, 10:04 AM
Originally posted by ReconRider25
if thats leakin u need to rebuild ur caliper cuz u shouldnt have fluid comin outta there. silicone will work tho to seal it up...

cool thanks for the good info.. can you give me other info where to put the silicone ?

JOEX
11-21-2005, 10:18 AM
Silicone isn't going to fix the problem.

D12
11-21-2005, 10:22 AM
so my galiper is dead i have to get another one ?

coryatver
11-21-2005, 10:34 AM
It is called caliper if you are not joking. And you don't need a new one just get it rebuilt by a shop.

JOEX
11-21-2005, 11:58 AM
You probably just need to replace the seals.

Joe400ex
11-21-2005, 01:31 PM
can i see a 400ex with a block off on it already

D12
11-21-2005, 02:14 PM
Originally posted by JOEX
You probably just need to replace the seals.

yeah that was the problem... removed the caliper, the piston then i saw the little seal was broke, so i bought a new one.. now it's A1.. thanks for the help.. even if some of the answer wasn't the best.. !!

jeremy_283
11-21-2005, 08:15 PM
i installed a block off on my ex fine nothins wrong you got problems sounds like its the manufactures screw-up

TRX_450
11-21-2005, 08:16 PM
U STOLE MY AVATAR!!!!!!:grr: :grr: :grr: :mad: :mad: :mad:

jeremy_283
11-21-2005, 08:22 PM
whats an AVATAR ?

D12
11-21-2005, 11:46 PM
Originally posted by TRX_450
U STOLE MY AVATAR!!!!!!:grr: :grr: :grr: :mad: :mad: :mad:

sorry but i have this avatar since march 2004 :p

phildogg
11-22-2005, 05:49 AM
what a nice avatar it is though:devil:
phil

ImWhite
11-22-2005, 01:49 PM
yea i think every1 should have the same 1!haha