cut fenders

[trx450Rrider55]

can someone post a pic with cut front fenders

[450r51]

only shot i got of it.

[cb450r]

http://i30.photobucket.com/albums/c306/cb450r/over.jpg
Hope this helps.

[Leschj03]

Originally posted by cb450r
http://i30.photobucket.com/albums/c306/cb450r/over.jpg
Hope this helps.


what did you use to cut your finders cd450r

[quad9]

my buddys 04

[cb450r]

I first laid out a pinstripe tape line to get the look desired, I then used tracing paper to make a template so both sides would be the same, after transfering the template/tape line to the other side I re measured to make sure that they were equal.
I cut the fender with a Dremel cut off wheel about 1/8th of an inch away from my tape line, then I used a coarse sanding wheel to bring the cut closer to the tape line.
To finish up I used a file and brought the cut right to the tape line, and then used elbow grease and some emery cloth to finalize and smooth the cut, ending up with 1500 grit wet/dry.
Last step includes taking the tape off and getting rid of the frayed edge by running a razor blade perpendicular to the fender.
Hope this helps.

[cb450r]

Leschj03 Do you ever make your way to the River park in Council Bluffs?

[Ridin' Jesse]

heres mine
http://i3.photobucket.com/albums/y93/HiPer450/My%20Quad/714045-R1-14-11.jpg
http://i3.photobucket.com/albums/y93/HiPer450/My%20Quad/714045-R1-13-12.jpg
http://i3.photobucket.com/albums/y93/HiPer450/My%20Quad/714045-R1-12-13.jpg

[slosh13]

Heres mine I just used a jigsaw to cut them and then a file and a piece of sandpaper to smooth them out and finish them up.

http://img.photobucket.com/albums/v628/slosh13/finished5.jpg

http://img.photobucket.com/albums/v628/slosh13/finished6.jpg

[chris450R]

my ride...

[redrider05]

here a pic of mine not the best....its on my phones camera..

http://www.imagestation.com/picture/sraid195/p94d0828cbeeddeef801a31c5a64764b5/f160cca7.jpg

i like the no fender look

http://www.imagestation.com/picture/sraid193/pb706017e4d1a26189c4853ee5e38bfc2/f19c6781.jpg u can kinda see it there

[jeepnrocks]

I like that cut on lesch's bike

[Hawk III]

Originally posted by cb450r
http://i30.photobucket.com/albums/c306/cb450r/over.jpg
Hope this helps.

you are going to do mine for sure cb :) those look very nice!

[cb450r]

this is not a problem Hawk;) I still have the templates. and a case of beer:D

[trx450Rrider55]

bump

[305400ex]

http://i24.photobucket.com/albums/c14/idal305/Picture002.jpg