which exhaust

[One_Bad_400]

FMF Titanium 4 or White Bros. E-Series

those are the two I've been looking at. I like the FMF cause i could later get the Powerbomb headers to go with it. I've only found the White Bros. E-Series Pro-Meg with the whole system, and right now i don't want the whole system, cause i don't have $450, i'm only looking at spending about $250 tops. The FMF is only about $180 for the silencer, but i'd have to get a connector pipe that would run about 65 bucks.

which one?

[CR125Rider]

i say get the money and go for the WB pipe. I've read that the WB gives the best performance gain for the 400ex.

[One_Bad_400]

thanx for the reply CR125RIDER, but i was really looking for somebody with experience with these two exhausts

[eldoexrider01]

i just got thru puttin the wb eseries slip on on my 400ex. i also put the k&n power kit with stage 1 jets. its a really good pipe. it gives a nice low sound but not too loud unless u romp on it really hard then it get a lil loud. all my friends like it and are not annoyed by it and i also love it and have no second thoughts about it.

[One_Bad_400]

i was thinkin about goin that way, but there aren't any headers that are made for that pipe, are there? incase later, after i had the money, i wanted to get the pipe to go with the silencer.

[eldoexrider01]

if i remember right the pro meg and s bend silencers look like they bolt up different and have a different diameter goin into the silencer. ive heard that the fmf powerbong pipe bolts up to the slip on e series. id look into that thou.

[One_Bad_400]

how would i find out the diameters of the pipe? if the e-series fits the factory 400 headers and the powerbombs are the same size as them, then it would work. Plus the FMF Titanium 4 will fit on the factory or the Powerbombs, so they are the same size, so a WB E-Series would fit on the Powerbomb headers. i bet that would make a good combo.