check out my a-arm grease fittings

[maxamillion]

I ordered this bushing set from www.atvbushings.com and purchased the grease fittings seperate. Directions came with the kit and the guys at Helm Enterprises were very helpful with the questions I had. It took some time to drill and tap the a-arms. I also grinded slots in the frame for more clearance for the new fittings (this was only necesary for the a-arm mounts closest to the bumper, the back mounts have slots from the factory). Here are some pics of the install.... The last one shows how far the lower a-arm can travel before the grease fitting hits the frame.

http://www.imagestation.com/picture/sraid194/p87f91dad54f1eb8289f638e1b1b28efd/f1710611.jpg

http://www.imagestation.com/picture/sraid194/pf78574c3afa4a2b9f6128c5d67f16180/f17105f1.jpg

http://www.imagestation.com/picture/sraid194/p2e3af4462e231fac5b28398338bd0673/f17105e0.jpg

http://www.imagestation.com/picture/sraid194/pa6b2088b7872c41e3ee6dd60646eb00e/f17105c0.jpg

http://www.imagestation.com/picture/sraid194/p3106043762c5fc642dc8ac9da959bb1f/f17105a4.jpg