Loose Sproket Hub

[muff]

Should I get a new axle and sproket hub cause my stock sproket hub is loose, and my brake hub spindles are all mashed up, I could barely get it back on with a mallet?

From what I've heard the rpm and the lonestar axels are good, are these adjustable, I would like one thats adjustable, from around stock width to like +4

[Dave400ex]

Yes the Lonestar and RPM are Adjustable. I think the Lonestar is from Stock to +3 and the RPM is Stock to +4. I would get a RPM.

[muff]

is it ok if my hub is loose though, cause i really dont want to spend 350+ for something i dont really need

i broke my sprocket hub a couple weeks ago and i took to a shop and they said i had to order a whole new axle i knew that wasnt right though so i went to www.lsracing.com and just got a new sprocket hub instead of having to by a whole new axle

[muff]

i think i'm going to get an axle because I want an adjustable one, i went to lonestars website but their axle only went down to +1.5, I want something that'll go to the stock size, I haven't looked at rpm yet but I guess I will

[muff]

if anyone was wondering some of the 400ex rpm axles go from +1 to +4, and they also have cross country ones that go from -2 to +1

[phatswinn]

so lsr's arent +4?

[muff]

the lonestar adjustable axle goes from +1.5 to +3.5

[muff]

I just got this off their website

The 250R,250X, and 300EX are adjustable from +2" to +4" over stock. The 400EX is +1.5" to +3.5" All Yamaha's and Suzuki's are adjustable from +1" to +3" over stock.

BUt you still get the +4 on the 400ex axle,,,reason being the hubs on 400ex's are longer than the other model quads mentioned...basically,,if you put a LSR axle your gonna be at 50 inches..