QuadRP
11-14-2005, 10:52 AM
Well, I am selling and gettin another dale...
So here it is---NEEDS HANDLEBARS AND CLAMP!
ALL Motor updates
Stage8
Motor Mount
Z400 Bearing
High comp piston and new sleeve(stock bore)
My home made Oil line update
LSR +4 axle
LSR sprocket Hub
18x10x8 MXR4's on T9's .190's
20x6x10 MX's on Dougles .190's
Short Air Stack
Tether
Hydro Clutch
Speed Ohlins
Rear Ohlins
Has more stuff Im forgettin...
One thing it needs a O ring for the Oil line on the back of the motor that goes from frame 90 degree angle to motor.
Make offer, First good offer takes it...Searisly, no douts...good offer above 2k and its urs...
Start the bidding at 2000
So here it is---NEEDS HANDLEBARS AND CLAMP!
ALL Motor updates
Stage8
Motor Mount
Z400 Bearing
High comp piston and new sleeve(stock bore)
My home made Oil line update
LSR +4 axle
LSR sprocket Hub
18x10x8 MXR4's on T9's .190's
20x6x10 MX's on Dougles .190's
Short Air Stack
Tether
Hydro Clutch
Speed Ohlins
Rear Ohlins
Has more stuff Im forgettin...
One thing it needs a O ring for the Oil line on the back of the motor that goes from frame 90 degree angle to motor.
Make offer, First good offer takes it...Searisly, no douts...good offer above 2k and its urs...
Start the bidding at 2000