PDA

View Full Version : Serious question don't laugh


Conwaymx
11-11-2005, 09:18 AM
Alright here goes nuthin

Is ther any way I can put a warrior head and piston on my timberwolf engine? I know that there are a lot of performance parts out there for a warrior. is there any way this will work.
ZeroLogic
11-11-2005, 11:22 AM
i dont think so

if there the exect same engine then i would say yes then
Jake250ex
11-12-2005, 05:55 PM
nope! I think you confused the T wolf with the Wolverine. The wolverine and the warrior share the same engine ;)
Conwaymx
11-14-2005, 11:09 AM
no i'm sure it is a timberwolf. I think the head bolts are the same so then why shouldn't it work?
parkers30
11-14-2005, 12:02 PM
well, short answer no....

reasoning:

Bore x stroke on Timberwolf: 71mm x 58mm

Bore x stroke on Warrior: 83mm x 64.5


with a 5mm different in bore I would be suprised if the head bolts lined up first of all, let alone the difference in bores cause the head from the warrior and cylinder from the timberwolf to be the same diameter, everything is worth a shot if you have the machining capabilities and spare parts laying around, but why not just upgrade to something more powerful, it would be alot cheaper in the long run than trying to hop-up a timberwolf