PDA

View Full Version : z400 parts. stock and aftermarket. very cheap!!!!



ramp rida 55
11-10-2005, 10:42 PM
2003 stock frame gussetted by Walsh Race Craft and powder coated black. very good cond.
no title $350

http://tinypic.com/fkurgn.jpg

2003 frame (was replaced by suzuki warranty in 2004 so it is technically a 2004 style frame) gusseted by proffessional welder made to copy the lonstar gussets. powdercoated red very strong great cond. except one dent on the bottom. have title $400

http://tinypic.com/fkutz6.jpg

2003 Engine 440cc 94mm piston port, polish, kibblewhite valves/heavy springs. barnett clutch, comes with wiring harness and yoshimura rev box. also comes with a stock engine that has all good parts except 3rd and 4th gear are blown and the case is cracked. engine is very powerful and can keep up with the best of them. i recommend running this engine with an fcr carb. $1600 for both engines

http://tinypic.com/fkuur9.jpg

http://tinypic.com/fkuv4x.jpg

03 subframe painted white but needs new paint or powder coat. $50

http://tinypic.com/fkuwox.jpg

03 sub frame powdercoated black slightly bent can be easily straightened $40

http://tinypic.com/fkuwyc.jpg

Walsh Race Craft +1 steering stem. powdercoated silver. straight comes with clamp. $150-sold

http://tinypic.com/fkuzrp.jpg

FCR41mm carb. comes with all the boots and cables to make it work on a z-400. bought for $700 new will sell for $250

http://tinypic.com/fkux74.jpg

stock 03 yellow plastic. race cut front and rear small scratches. comes with extra side panels and maier tank cover. $60

http://tinypic.com/fkuxow.jpg

http://tinypic.com/fkuy2u.jpg

Stock Seat. never been used. has tiny rip. $50

http://tinypic.com/fkuycn.jpg

Ac Pro Peg Nerfbars. pegs are still fairly sharp not bent. black nets. $80

http://tinypic.com/fkv04h.jpg

Gibson Pro Peg Nerfbars. pegs are still really sharp. nerfs are slightly bent but easily straightened. $60

http://tinypic.com/fkv0hs.jpg

Ac heel guards. fairly good condition. $35

http://tinypic.com/fkv0qx.jpg

**items not pictured.

Front Hiper Carbon Fiber Beadlocks. black rings. 1-4 offset great cond except minor scratches. come with good tread kenda klaw 20" $180 for the pair -sold

Rear Hiper Carbon Fiber Dual Beadlocks black rings.Come with 18" kenda klaws with good tread. $200-sold

stock swingarm comes with bearing carrier and linkage. $100

stock axle. $50

Stock rear shock $75

Stock front shocks. $75

Front Brake Set. have 2 one comes with steel braided lines. $50 for steel $40 for rubber

Rear Brake set. One has K&K block off. $40 for each

Stock Silencer $35

Pro Design Intake w/ Dual Stage foam. $40

Stock Tie Rods $30

stock gas tank. i have 2. $30 each

i also have bunch of other misc. things just ask and ill see what i got

e-mail: danbm488@comcast.net

rrguy
11-11-2005, 08:25 AM
I want the front hipers & front spindles/ hubs if you got them for sale.
thanks
Greg

carrie416ex
11-11-2005, 09:06 AM
I'll take the rear Hipers! E-mailed you.

rrguy
11-11-2005, 10:14 AM
Dan
I will try & get MO out today for the fronts hipers.
thanks
Greg

Meso
11-11-2005, 08:20 PM
I'll buy your seat for $50.00. What's your mailing address?

Meso
11-12-2005, 05:48 PM
Do you still want to sell your Z400 seat?

ramp rida 55
11-13-2005, 02:18 PM
i think i have a buyer for the seat right now. if i dont sell it ill pm you

Meso
11-13-2005, 07:01 PM
Thanks RIDA. The mail order will be on it's way Monday afternoon. Happy riding to all...

llknowlesll
11-25-2005, 12:02 PM
Do you still have the FCR 41mm Carb? If you do email me at: dknowlesjr@earthlink.net


Thanks,
David

backyardusa
11-27-2005, 10:25 PM
still have the walsh frame? backyardusa@sbcglobal.net

StrokerBanshee
12-07-2005, 06:42 AM
hey man i am in bad need of that subframe, is it bent any? if not u can consider it sold i need one bad so u can email me with a reply at kevinz440@hotmail.com

StrokerBanshee
12-08-2005, 06:57 PM
so whats the deal on the subframe? i am in bad need of one

StrokerBanshee
12-08-2005, 07:08 PM
if u say u can straigten it for me ill buy it

StrokerBanshee
12-08-2005, 07:08 PM
give me a call my name is kevin 501-351-3036

rrguy
12-10-2005, 11:28 AM
ramp rida 55 I got my parts
thanks
Greg

100%suzuki
12-14-2005, 03:53 PM
do you still have the ac propeg nerfs?if you do please pm me.thanks

speedracer400
12-29-2005, 04:59 PM
doyou still have any frames available?

stuntman
01-01-2006, 12:49 PM
you still got the axle, if its in good shape i definetly want it like yesterday.

ramp rida 55
01-01-2006, 04:15 PM
everything is sold besides the race engine $1200 and the stock parts

Bad Ass TA WS6
01-06-2006, 04:35 PM
My buddy sent you an email about the swingarm/carrier. (Dave@3D) He's located in northern Mass. but willing to travel most likely.

Either contact Dave, or I. I'm going to send you a PM right now with his phone number.

Rob

1fastZ1slowridr
01-09-2006, 03:15 PM
I was wondering if you still have the rear brake setup with the block off? and if you take paypal

ramp rida 55
01-11-2006, 12:55 PM
sorry i sold that already.

I will sell the motor for 1200 shipped!!!!