PDA

View Full Version : blowing oil out exhaust



440ex78
11-10-2005, 10:34 AM
My head gasket keeps blowing and the last time i started it up oil was comming out of my exhaust pipe is that bad what is going on

03pissedoff426
11-10-2005, 10:40 AM
it is bad, but it won't really hurt anything. i wouldn't keep riding like that though.

RiderTRX400ex
11-10-2005, 02:06 PM
oil comming out of your exhaust??:scary:

ZeroLogic
11-10-2005, 03:30 PM
its not good when my quad burned oil really bad it blew oil out of the header and muffler

JOEX
11-10-2005, 09:32 PM
Originally posted by Chicksdigme423
you are stupid
If you don't have anything positive to contribute then leave:grr:

ZeroLogic
11-11-2005, 07:31 AM
Originally posted by Chicksdigme423
you are stupid

thanks for the tip keep up the good work:macho

440ex78
11-11-2005, 09:08 AM
thanks for your reply but what needs to be done to fix it?

03pissedoff426
11-11-2005, 12:47 PM
new rings probally. but if your lucky maybe just a head gasket

bwamos
11-11-2005, 01:01 PM
Did you put in heavy duty studs when upgrading your engine? If not you may want to since you're blowing a lot of gaskets.

RiderTRX400ex
11-11-2005, 08:09 PM
deffenitely get the heavy duty head studs from GT THunder, but make sure you or whoever puts them in knows what they are doin!! :cool:

11-11-2005, 09:11 PM
Originally posted by Chicksdigme423
you are stupid

so if he is stupid and your not then u should be able to tell him whats rong with his quad:rolleyes:

SHADETREE101
11-12-2005, 04:35 AM
if you ar pushing oil past your rings, then you need to think. maybe you aligned your rings wrong. if the gap of the rings are lined up then it will blow past them easily. the only other thing i can think of is the valve seals are waisted or missing. as for blowing head gaskets. are you torquing the head down to 40 ft. pounds or leaving it at the factory 33 ft. pounds. if you were tourquing factory you are creating to much cylinder pressure for tha now and have to tighten them a little extra to hold that pressure. not to much or you will pull the head studs out. be careful. did you overfill the oil?

440ex78
11-12-2005, 01:28 PM
thanks for all the help i check every thing hopefully it will come out good cant wait to ride