PDA

View Full Version : Clutch Seal



400exc
11-09-2005, 03:32 PM
Me clutch seal is going bad and is leaking oil, is it hard to change by mysefl, because i dont want to spend an arm and a leg to have honda dealer to do it, it is leaking oil slowly, has anyone else had this problem before?

400exc
11-10-2005, 05:59 AM
anyone?

QuadJunkies
11-10-2005, 01:11 PM
Its VERY simple... DO NOT take it to a dealer.. On a scale from 1-10 its a 1 to fix

Just pull the clutch cover off , the rod will pull striaght out of the the clutch cover, push the seal out , put the new seal in , I reccomend you use a new gasket(clutch cover gasket, its not metal and you always take a chance re-using them that they make leak. The seal is cheap in price.
When you pull the cover,there will be a small spring at the bottom of the rod,be sure not to lose it , you should be able to complete this all in about 5 minutes from start to finish.

Hope this helps :)


Tina