PDA

View Full Version : Banshee MX parts



Blizzard24
11-06-2005, 12:29 PM
OK heres the deal... Putting the shee back to stock. In BOLD are the parts I will take some extra money off of if GOOD stock parts are thrown in. All these parts are in EXCELLENT condition. Never raced, just on the practice track and trails a few times.

Janssen MX Tech A arms +2" pc'ed blue w tie rods $450 or $350 w stock a arms and tie rods.
Elka Dual rates w Comp adjust/SSD/Piggyback Remotes for $190-220lbs rider $600 or $525 + stock shocks
Rear stock Elka Conversion Dual Rate w SSD for 190-220 lbs rider $225 or $150 w stock
Trinity 2-1 Carb setup Complete w manifold and stainless cable $300 or 225 w stock carbs
Janssen MX Tech Swingarm w round Carrier -1" w skidplate mounts pd'ed blue $500
Janssen +1.5 Chrome stem w antivibe 1 1/8" clamp $150
AC Propegs w heelgurads black nets $150
Durablue Eliminator 2+2 axle $230
Tag T2 Bars YZ Hi bend anod blue w pad $40
Dynoport 2-1 pipe/silencer Nickle plated $250
Burgard 8" Beadlocks w Kenda Klaw 18" MX rears 85% tread left $200
Douglas .190 10" fronts w Kenda Klaw 20" Mx fronts 90% tread $100
Front stainless brakelines +2" $40
Rear stainless brakeline stock length $25

Can get pics upon request
Paypal or money orders only

email me w any questions at face0461@aol.com

Thanks -Chris