Lil90man!!
06-19-2002, 09:32 PM
Hey i got bored so i decided it was time to remove the spark arrestor on my bike. after like an hour of careful grinding with a small dremel tool i finally got the welds all broken loose, then it took a few mins of prying with a screwdriver to presuade it to come out, but now it has a lot throatier sound to it, and isn't overly loud(but i have to put it back in to ride it at any local riding area) but for around my house where i ride 9/10ths of the the time its good, it has a bit more throttle response and has a better top end now:D but i have a question i ran it for a lil while bout 20 mins or so and did a plug check the plug was whitish gray and as it got farther away from the end i guess you'd say it got black at the very bottom, it didn't have any brownish to it is it lean??? it didn't cut out at all anywhere like on top and it defiantly wasn't richso is it ok? i'm gonna put a filter in it before long and will pry have to bump it up a few sizes but is it ok for now?? thanks