Kick start questions

[ZSK]

I'm thinking about getting a Rekluse. This will eliminate the ability to bump start it if the battery was to fail. If I do the Rekluse I think the kick start is manditory.

What consists in the kick start kits that you can buy? What is involved for the install? I won't be eliminating the electric start at all.

[daddio]

better off getting the parts from yamaha and not the "kits" all you need is the 5XD-15601-00-00 KICK SHAFT ASSY, 5SG-15668-00-00 STOPPER , 214-15686-00-00 WASHER, LOCK , 90101-06001-00 BOLT (2 required), and 93102-20108-00 OIL SEAL from a yz450f, and a 4EW-15620-02-00 KICK CRANK ASSY from a 2000 yz250.

[d kelley]

the kick start kit on the 06 yfz needs to be modified a little because of the brake hose to reservoir clearance problem. GYTR was to come out with a new part number for the 06 yfz kick start kit. you check if you are working on that model yfz.

[daddio]

I'm sorry. I forgot about that. I relocated my resivoir so it was easier to get to, to fill it up. I used the Quadtech bracket.

[tuefelhunden]

Call bob @ Magnolia Yamaha. He can get you only the parts you need for this for $120. That is the best price I could find. This will include the '98 YZ250 lever which is stronger than the GYTR unit.

[ZSK]

Is this a case splitter or can it be done with the engine in frame? What is involved in installation.

[daddio]

all you have to do is remove the right side cover. It can be done with the engine in the quad.

[JDiablo]

All you need to do is remove the sidecase and anything that goes with it.

Then
Remove your whole clutch assembly,including the basket then its pretty simple,i have a video i can upload if you need to which shows you the installation of it

[Bronson90]

super easy, it took me all of about 20 mins to install it. good luck.