13 tooth

[trict_out]

Well i picked up a 13 tooth this week and im gettin ready to throw it on. What do i do to compensate for chain slack when it goes on? tighten it up or remove a link?

probly just tighten it up n if it cant go tight enough remove a link

[Punk'd]

Originally posted by trict_out
Well i picked up a 13 tooth this week and im gettin ready to throw it on. What do i do to compensate for chain slack when it goes on? tighten it up or remove a link?

It tightens up just fine

[trict_out]

thanks guys

[trict_out]

also do u have to remove the ****ft lever to get the sprocket/chain guard off?

[quad9]

yes just pull the shifter off and everything will come right off with no problem. the chain will tighten up just fine.

[benwa450r]

I use 13-37 to 14-39 with just adjusting chain slack with rear carrier. The shift lever has to come off. There is a dot on the shaft to line up on the lever. Watch where the dot is on shaft.