PDA

View Full Version : PArting out 300 racers. lots of AFTERMARKET and INTERCHANGABLE PARTS



330EXman
10-25-2005, 01:01 PM
*Dura blue eliminator AXLE with extras $200

*OMF rear bead locks $125

*douglas front rims $75

*ac nerf bars $100

*ac wide grab bar $35

*Black maeir 400ex race plastic $200

*planet honda 400ex seat $35

*tag cr low bend gold metal bars $35

*nac's bar clamp $20

*pep easy pull clutch $20

*LRD custom exhaust full with huge stepped head pipe hands down the best pipe for a 300ex $275

*400ex carb that was on my 300ex jetted right(makes a big difference the 400ex has an accellerator pump, 300 doesnt)
$75

*2001 300ex engine, this whole quad had less then 50 hours since new at the factory . just been sitting in my heated garage and fired up now and then. this engine was highly built, wiseco high comp piston,web race cams, titanium valve springs, valve job, head work, barnett kevlar clutch, and more this engine is built to have high high rpm power perfect for mx but will also like the woods. very very dependable engine and had very little use
this engine with the exhaust and carb setup has very very good power
TAKIN OFFERS VERY CLEAN

*250r front end modded to run on a 300ex $125 un painted
*250r front shocks $75
* 250r front end listed above complete $150
*300ex stock frame (2001 mint shape ) $350
*300ex stock swing arm $75
*300ex stock red seat $35
*300ex wirering !!!!!!!!!!!!!!
*300ex front hubs $35 (pair
*Spindles $20 each
*300ex front brakes $ 25 for master and lever, $50 for calipers
*300ex rear brakes $35 for master and lever, $40 for caliper
*300 air box $35
*shifter brake levers $30
*steering stem $40
*and lots more

330EXman
10-25-2005, 01:03 PM
ALOS HAVE STOCK 300EX

*cam shaft
*piston
*carb
*valve springs

skinkade
10-25-2005, 01:24 PM
Do you have pics of the black 400ex plastic?

330EXman
10-25-2005, 02:02 PM
hey shoot me an email address i think the plastics might be sold but i will email a pic and keep you posted to what happens

will make some kind of deal for package deals

lets talk need this stuff gone

thanks Jay

400exrider707
10-25-2005, 02:05 PM
Originally posted by skinkade
Do you have pics of the black 400ex plastic?

If you cant get the black plastic from him I have a set w/ klotz grahpics and a klotz seat cover. PM me for info, provided you cant get his stuff first.

rollie
10-25-2005, 02:30 PM
I might be interested in the carb

330EXman
10-25-2005, 02:41 PM
the carb is mint works great and is a great low cost improvment for the 300ex

the 300ex doesnt have a accelerator pump this one does,

get the performance of a aftermarket carb for a fraction of the cost

will include the throttle cable

thanks jay

brian350rx
10-25-2005, 03:06 PM
send some pics of the 400ex seat
b_andriot@yahoo.com
Also, what jets are in the 400ex carb?
thanks

87250rxrider
10-25-2005, 03:11 PM
what quad are the ac nerfs for?

Moto 4
10-25-2005, 06:46 PM
im interested in the rims. do u got any pics?

Ridr300ex
10-25-2005, 07:09 PM
Hey do you have aim or a e-mail? I could use a few things from you....thanks

330EXman
10-25-2005, 07:11 PM
ok guys

everything is for a 300ex unless noted also some of the 300ex parts are interchangable with a 400ex or 250r or 450r so on as most of you prob know like rims and such


the 400ex plastics and seat are SOLD

as for everything else alot of people are talking and asking and makin offers but if someone COMES TO THE PLATE AND SAYS I WANT EM THEN THEY WILL BE YOURS SO LETS GETTHIS STUFF OUT OF HERE

THANKS JAY

watts16
10-25-2005, 09:12 PM
pics of bead locks?

quad9
10-26-2005, 04:14 AM
pic, and price of nacs bar clamp please

AtvKid4Eva
10-26-2005, 04:22 AM
pics of the bars???? atvkid4eva@yahoo.com

James Cornell
10-30-2005, 09:56 AM
what kind of change are you looking to get outta that engine?

m_townsgreatest
10-30-2005, 10:16 AM
how much for the wiring?

330EXman
10-30-2005, 12:26 PM
$100 for the wirering

as for the engine email me and we can talk i believe it could be sold but the guy hasnt responded for a couple of days i should be talkin to him tommorrow if not then i will offer it up for grabs

please email me or instant message me at m13jason13 and we can talk about the engine

i have it all crated up and ready to go and will consider interesting trades guns, parts, toys , anything let me know

thanks JAy

Moto 4
10-30-2005, 07:43 PM
pm sent

Chino886
10-30-2005, 08:32 PM
Originally posted by 330EXman
*Dura blue eliminator AXLE with extras $200

*OMF rear bead locks $125

*douglas front rims $75

*ac nerf bars $100

*ac wide grab bar $35

*Black maeir 400ex race plastic $200

*planet honda 400ex seat $35

*tag cr low bend gold metal bars $35

*nac's bar clamp $20

*pep easy pull clutch $20

*LRD custom exhaust full with huge stepped head pipe hands down the best pipe for a 300ex $275

*400ex carb that was on my 300ex jetted right(makes a big difference the 400ex has an accellerator pump, 300 doesnt)
$75

*2001 300ex engine, this whole quad had less then 50 hours since new at the factory . just been sitting in my heated garage and fired up now and then. this engine was highly built, wiseco high comp piston,web race cams, titanium valve springs, valve job, head work, barnett kevlar clutch, and more this engine is built to have high high rpm power perfect for mx but will also like the woods. very very dependable engine and had very little use
this engine with the exhaust and carb setup has very very good power
TAKIN OFFERS VERY CLEAN

*250r front end modded to run on a 300ex $125 un painted
*250r front shocks $75
* 250r front end listed above complete $150
*300ex stock frame (2001 mint shape ) $350
*300ex stock swing arm $75
*300ex stock red seat $35
*300ex wirering !!!!!!!!!!!!!!
*300ex front hubs $35 (pair
*Spindles $20 each
*300ex front brakes $ 25 for master and lever, $50 for calipers
*300ex rear brakes $35 for master and lever, $40 for caliper
*300 air box $35
*shifter brake levers $30
*steering stem $40
*and lots more

what size are the rear beadlocks?

James Cornell
10-30-2005, 09:14 PM
whats your e-mail addy, very interested in the engine, i need to get my quad back up and running.

FourFiftyFour
10-31-2005, 02:32 AM
what size are the rear beadlocks? I NEED SOME REAR WHEELS BAD.

330EXman
10-31-2005, 10:34 AM
REAR BEADLOCKS

I HAVE HAD OVCER 20 PEOPLE TELL ME THEY WANT THE RIMS

IF SOMEONE WANTS THEM BUY THEM THEY ARE A STEAL AT WHAT IM ASKIN FOR THEM AND IVE SENT ALL KINDS OF PICS TO EVERYONEI WILL SEND PICS BUT SOMEONE MUST WANT THEM

THEY ARE 8" OMF ALUMINUM BEADLOCKS WITH A ANODIZED RED BEADRINGS.

james cornell

my email is m13jason13@aol.com
instant message me on aol at m13jason13

the guy has not responded to me at all and i would make a deal with you if you were interested seeing how he said he was onna get the money order together and everything then i never heard from him

so get back to me we can talk some buisneess and hopefully you can have a new engine for your wheeler

thanks jay

330EXman
11-02-2005, 07:55 PM
ok guys
THIS IS STUFF I HAVE SOLD EVERYTHING ELSE IS HERE

engine
axle
electricals
gas tank
grab bar
300ex seat
omf bead locks
douglas front rims

and maybe
400ex plastic and seat but i havnt heard from the guy lately

still have alot of stuff like

frame,
swinger
rear shock
front end
nerf bars
KICK *** lrd EXHAUST WHICH MIGHT BE SOLD
steering stem
bars
clamps
spindles
front brakes
rear brakes
front hubs

330EXman
11-02-2005, 07:55 PM
ok guys
THIS IS STUFF I HAVE SOLD EVERYTHING ELSE IS HERE

engine
axle
electricals
gas tank
grab bar
300ex seat
omf bead locks
douglas front rims

and maybe
400ex plastic and seat but i havnt heard from the guy lately

still have alot of stuff like

frame,
swinger
rear shock
front end
nerf bars
KICK *** lrd EXHAUST WHICH MIGHT BE SOLD
steering stem
bars
clamps
spindles
front brakes
rear brakes
front hubs

330EXman
11-02-2005, 07:56 PM
ok guys
THIS IS STUFF I HAVE SOLD EVERYTHING ELSE IS HERE

engine
axle
electricals
gas tank
grab bar
300ex seat
omf bead locks
douglas front rims

and maybe
400ex plastic and seat but i havnt heard from the guy lately

still have alot of stuff like
SOME MUST AT LEAST WANT THE lrd eXHAUST AND NERFS
frame,
swinger
rear shock
front end
nerf bars
KICK *** lrd EXHAUST WHICH MIGHT BE SOLD
steering stem
bars
clamps
spindles
front brakes
rear brakes
front hubs

THANKS JAY

STILL HAVE ENOUGH STUFF TO MAKE ALMOST A ROLLER GOOD START FOR SOMEONE WITH A PROJECT IN MIND HELP ME GET RID OF THIS STUFF

James Cornell
11-03-2005, 04:57 PM
hey Jay did that guy come through with the Money Order on your engine? If not i'm ready to make an offer that was within $50 of you, so PM me or Email me please.
James

big k
11-03-2005, 06:50 PM
im interested in the front end its complete with tierods and every thing right how are the joints? and do you still have the rear caliper thanks if you could email me at big_k27@hotmail.com thanks oh and is the swinger stock length

s.ga.rider
11-05-2005, 09:12 AM
pm sent

330EXman
11-06-2005, 04:28 PM
ok

i will do it like this
THIS IS A LIST OF WHAT IS LEFT FROM THE LIST ABOVE
EVERYTHING I LIST RIGHT HERE IS STILL FOR SALE

LRD COMPLETE RACE EXHAUST
NERF BARS
FRAME
FRONT END
SWING ARM
REAR SHOCKS
STEERING STEM
FRONT CALIPERS AND MASTER
REAR CALIPER AND MASTER
FRONT SPINDLES
FRONT HUBS
TAG BARS
NAC'S HANDLE BAR CLAMP
PEP EASY PULL
STOCK VALVE SPRINGS
STOCK CAM
MAYBE FRONT RIMS
MAYBE BLACK 400EX RACE PLASTIC AND SEAT

THE FRONT RIMS AND RACE PLASTIC MIGHT BE BACK FOR SALE CAUSE I AINT SEEN ANY MONEY FOR THE PLASTIC AND THE GUY FOR THE FRONT RIMS DIDNT INCLUDE SHIPPING ON THE PRICE OF THE RIMS AND I DONT KNOW IF HE WNTS ME TO SEND THE MONEY BACK AND QUIT OR NOW SO I AM GONNA COLLECT INTERESTS ONT HE PLASTIC AND FRONT RIMS AND HOWEVER IS FIRST ON THE WAITING LIST WILL OWN THEM TOMMORROW OR THE NEXT DAY

THANKS JAY @ JMS RACING

big k
11-06-2005, 08:19 PM
im still interested in the complete front end let me know

330EXman
11-06-2005, 09:03 PM
ok im gonna talk toy uo about the front end tommorrow i will sa that the frnt end doesnt have the conversion bracket i never used one all you gotta do it compress the shock like 1 " if that to bolt it on and i like the way it sits great woods set up and i ran mx with it like this also some race track you might want a lowered wheeler but anyways i will send pics if needed to show how your wheeler woudld sit without the shock conversion mount its really pretty good i think

thanks
Jay @ JMS Racing

MichaelS693
11-07-2005, 08:39 AM
got a bearing carrier?:)

yamadooski
11-07-2005, 10:24 AM
If the previous guy didnt buiy the front hubs I need them for my sons mini quad.
PM if you still have them.

big bad beny
11-07-2005, 05:55 PM
DO you have the stock plastic for the 300EX if you do how much and what color are they i want all the plastic.
Do you still have the seat and how much.

big k
11-07-2005, 07:29 PM
im not to worried that it dosent have the conversion bracket im pretty fat so it will look lowered when im on it

capeters
11-08-2005, 05:30 AM
Do you have the piece that holds the rear caliper next to the axel carrier?

Deak
11-09-2005, 08:41 AM
I need a 300ex seat,If you still have one,is it in good condition?What payment method do you perfer? Thanks ,Deak

330EXman
11-10-2005, 08:00 PM
ok if you want the front end send me an email at m13jason13@aol.com

as for plastics all i have for sale is 400ex race plastic and seat no more 300ex stuff

also the rear shock i do have email me if you want it

the front hubs i do have would you want the spindles and calipers and everything also

thanks guys

THE 400EX BLACK RACE PLASTIC AND SEAT ARE BACK FOR SALE NO WORD FROM THIS GUYS SO I AM GONNA RESELL THEM

THANK YOU
JAY @ JMS RACING

Dave223
11-11-2005, 06:03 PM
would you happen to have a starter for a 300? if so, how much shipped to 70344? Thanks, Dave

nkc250r
11-16-2005, 08:13 AM
do you still have the rear caliper?

8my_Cash
11-21-2005, 11:48 PM
still got that carb and what 300ex motor were you running on it was it a 330 or a stock bore?

HB300ex
11-22-2005, 02:57 PM
have a stock bumper and upper right a-arm for a 300ex?

big k
11-22-2005, 05:44 PM
sorry i found a different front end that is chrome so thats how that goes but if you have an axle and caliper i need those also but if thier sold then whatever

330EXman
11-22-2005, 07:29 PM
sorry guys computer hada virus on aol but that is fine also the axles are sold and the carb was sold witht he engine sorry guys

this is what i have left

bars
nerf bars
shiny black maier race plastic (400 ex) was running this on my 300ex
planet honda black 400ex seat complete for plastic
LRD complete race system best system hands down
Brakes
frame
swingarm
rear shock
front end (250r modded for 300 use)
steering stem



thanks
jay @ JMS RAcing

Chino886
11-22-2005, 07:54 PM
Originally posted by 330EXman
sorry guys computer hada virus on aol but that is fine also the axles are sold and the carb was sold witht he engine sorry guys

this is what i have left

bars
nerf bars
shiny black maier race plastic (400 ex) was running this on my 300ex
planet honda black 400ex seat complete for plastic
LRD complete race system best system hands down
Brakes
frame
swingarm
rear shock
front end (250r modded for 300 use)
steering stem



thanks
jay @ JMS RAcing

interested in black plastics, pics to dave.hung@ssa.gov

EXer4life
11-26-2005, 05:21 PM
how much for the swinger and for the rear shock what are they seperatly as well

quadfamily
11-28-2005, 04:28 PM
Waiting for the frame price to come down. What's the lowest you'll go shipped?

330EXman
11-28-2005, 08:33 PM
swinger $75
rear shock $75
$135 plus shipping for both

nerf bars, $100 plus shipping


frame $300 plus shipping

thanks
Jay @ JMs Racing

yamahaman300
11-29-2005, 08:39 PM
please please e-mail me about the beadlocks

kevhertel@gmail.com

kyleschonert
12-01-2005, 10:15 PM
still have the tag bars? and are they the fat bars?

MichaelS693
12-02-2005, 11:36 AM
Originally posted by MichaelS693
got a bearing carrier?:)

SUPER_DAVE
12-04-2005, 01:10 PM
Originally posted by MichaelS693



Thats what I wanted to know.

Do you have a bearing carrier?

12-05-2005, 08:54 PM
do you have pics of the seat? bodia21@hotmail.com is it a gripper or not? all black?

30ex-man
12-12-2005, 06:28 PM
do you have pics of the exhaust?send to mike_del_305@yahoo.com

honda4life2002
12-13-2005, 06:01 AM
do you have stock 300ex shocks and if you do how much

bigdaddy650r
12-13-2005, 02:19 PM
how much shipped?
how did it look and fit on the 300ex?
will the 300ex seatbolt up to it and look ok???

I am in Kansas (66524)

330EXman
12-14-2005, 02:23 PM
i have a rear shock for sale, and also i would like to sell plastic whole as to its easier and no the 300ex seat will not bolt up when i put this 400ex plastic on my wheeler there are a few mounts you have to make very easy and also you must use front and rear plastic from a 400ex with a 400ex seat

thanks jay @ JMS RAcing

30ex-man
12-14-2005, 02:26 PM
do you still have the pipe send pic to mike_del_305@yahoo.com

scrappydu
12-29-2005, 01:49 AM
i was wondering if you stil had the carb for sale? and if so could you send me a couple of pics. i am very interested in it. if it looks good i will buy it please get back to me as soon as possible.

thanks
ryan

hondapro300EX
12-29-2005, 09:40 AM
I am very interested in that a-arm shock combo for 150.

Got money to send right now. Talk to you soon.

justin41414
12-29-2005, 11:30 AM
would you take $80 for the nerf bars

330EXman
12-29-2005, 11:46 AM
i'll take $80 plus shipping which cause of the size of the box and pending on where you are will be around $15-20

let me know

i dont have the carb that went with the engine and also the front end is sold

if you wanted the swinger and rear shock for $150 i will sell it to you right now i got alot of stuff being shipped and i can ship it right out let me know

jay @ JMS Racing

jm139
12-30-2005, 05:47 AM
$45. 00 shipped to 53147 ?

jm139
12-30-2005, 06:25 AM
How much for immediate ship to 53147? call 262 248 6066

330EXman
12-30-2005, 05:02 PM
cost allittle bit to send it right out before reciaving money

also i would need to get a few more dollars for overnight

let me know what you wantt to do

jay @ JMS Racing

TM426
12-31-2005, 10:03 AM
Do you still have the PEP clutch perch & lever? If so how much shipped to 60084?

justin41414
01-10-2006, 05:30 AM
Hi did you get the money order that i sent you for the nerf bars if so tell me when you shipped them

thanks

330EXman
01-10-2006, 11:11 AM
yes i did get the money order there is a mandatory hold on all money orders in my state right now due to fraud money orders

it clears tommorrow wednesday and when it clears i will send the nerfs out immediatly sorry i didnt tell you about the manadtory wait for the money order to clear but i will do my end of the deal asap tommorrow

thanks
jay @ JMS Racing

Chino886
01-10-2006, 11:14 AM
do you still have the front rims?

mark002
01-10-2006, 11:10 PM
do you have the rear caliper yet? whats the condition of it & pads? how much to ship to 98264 ? lynden,wa.

big k
01-16-2006, 05:40 PM
thanks for the front end

Moto 4
01-16-2006, 06:22 PM
do you still got the beadlocks? im very interested. Do you have any pics also? thanks

justin41414
01-20-2006, 06:15 PM
Do you have a tracking number and give me your e-mail

thanks

codybob
01-22-2006, 09:58 AM
i have a 95 300ex i am interested in ur exhaust and the plastics how much for both

330EXman
01-25-2006, 10:33 AM
hey man could you email me about the plastics and the exhaust i will be happy to work out a deal i would like to have them gone

thank you and i look forward to working something out

you can also call me at (207) 215-5705 if i dont pick up leave a message and i will call you back


sorry i didnt reply rite off i have been sick as hell for the last 3 weeks but i look foward to hearing from ya

thank Jay @ JMS Racing
m13jason13@aol.com

Moto 4
01-25-2006, 01:12 PM
do you still got the beadlocks? im very interested. Do you have any pics also? thanks

330EXman
01-26-2006, 07:38 AM
no i do not have the beadlocks anymore they sold the first day


i have:

tag bars
LRD full RAce complete exhaust
400 shiny black race plastic
400ex seat
300ex frame
300ex swing arm
300ex rear shock
300ex steering stem
300ex complete front brakes
300ex complete rear brakes
300ex spindles + hubs
300ex carb
300ex stock valve springs ALL ENGINE PARTS LESS THEN 5HRS
300ex stock cam

THANK YOU
Jay @ JMS RAcing

Chino886
01-26-2006, 08:00 AM
Hey Jay,

Emailed you....

kyleschonert
01-26-2006, 08:31 AM
how much for the tags and what bend/color are they?

300ex mxracer
01-26-2006, 07:47 PM
will you sell the bearing carrier seperate from the swinger? if so im am very interested. doesnt matter if the bearings are good or not-have some band new ones.send pics and lowest price to kelbyhartman@hotmail.com

212racing
01-27-2006, 02:20 AM
ex man clean out your inbox, its full

thanks

ThorRacing37
01-27-2006, 05:43 AM
i will buy those tag T2 bars with clamp right now $ in hand ill pay top dollor!

Camaden
02-05-2006, 12:51 PM
Is the swinger complete other than needing and axle? if so ill take it..

330EXman
02-05-2006, 08:08 PM
sorry guys havnt been on forawhile

the tag bars are for ssale still and also the swing doesnt have the bearing carrier well it does but i needs new bearings

i have the swinger, rear brakes, bearing carrier housing, rear shock so on

let me know

i also still have

Complete LRD race exhaust
300ex carb
300ex valve springs
300ex cam
300ex frame
all front and rear brakes
400ex meaier shiny black race plastic front and rear
400ex seat
some tires and rims
steering stem
tag bars
nacs bar claamp
spindles
swinger
rear shock


250r ct pipe
braided brake lines so on email or post needs
jay @ JMS RAcing
m13jason13@aol.com

kyleschonert
02-05-2006, 09:03 PM
pics. of the tags please. are they cr hi's? or what

300ex mxracer
02-06-2006, 02:05 PM
pics of the lrd to kelbyhartman@hotmail.com

330EXman
02-06-2006, 08:52 PM
give me an email to send pics of the tag bars

thanks
jay @ JMS RAcing

kyleschonert
02-06-2006, 09:02 PM
n/m. i ended up orderin some pro tapers today. thanks though.

ThorRacing37
02-07-2006, 05:30 AM
send tag pics to honda8fox@yahoo.com

hontrx265r
02-08-2006, 09:43 PM
sent you an email about the exhaust
Mike

quadfamily
02-11-2006, 04:46 PM
Can you give me a price on the Swing arm shipped please? What is included with the swing arm? And do you have any foot pegs? Thanks!

330EXman
02-12-2006, 03:45 PM
i have the swing arm and i have the foot pegs and also i have a rear shock and some humbs so on i have th e whole frame also


please email me at m13jason13@aol.com and give me an address to calculate shipping thank you ]

jay @ JMS RAcing

kyleschonert
07-09-2006, 05:36 PM
old thread, but do you still have the stem?

07-09-2006, 05:45 PM
still have the 400ex black plastic? very interested!!!

330EXman
07-10-2006, 08:14 PM
yes i do still have the plastics but somebody might be coming to look at them locally so if you want them you gotta jump within a day or two

AND YES I STILL HAVE THE STEERING STEM if you would want it please shoot me and email at
m13jason13@aol.com

07-10-2006, 08:25 PM
if you can put up pics, it'l be easier to tell :D

pics of both front and back please, good angles ^_^

and how much for them again?

hastek@aol.com
05-15-2008, 04:16 PM
Hey I was jsut wondering how you went 410 stroker on a 300 know it's an old post but i was just wondering please reply!

cmaxx
05-17-2008, 07:56 AM
how much for the lrd pipe?

AtvMxRider
05-17-2008, 10:14 AM
did you 2 see how old this thread is?:ermm: