PDA

View Full Version : 300 ex confused



MX wannabe
10-24-2005, 12:39 PM
im rebuilding my 300ex and i have it all torn apart and i sandblasted everything and painted it so it looks pretty. i put a 6 inch widening kit front nd back. so i have more stability, k&n filter dyno jet kit, rear skid, new clutch cable, all new bearings and seals on everything, so my problem is that the bike looks great now but i need more power and im stuck i have no clue what to buy what brand or nething for more power. i have to get it race ready by next summer. thanks

srfootball50
10-24-2005, 01:05 PM
first i would get aftermarket suspension since your gona race if you dont have to stay below the national limit of 300cc get alot of the stuff i have in my sig if you need to stay below the 300cc limit then get a .80 over piston (brings you up to almost 300cc) instead of a 330 if you do get a 330 i have always liked the four stroke tech kit, also poweroll makes a nice kit too the only reason i didnt get one of those kits is because i bought my quad with the tc kit already in it but the tc kit has ran great for me

MX wannabe
10-24-2005, 01:12 PM
thanks for the info im gonna go with the 330 kit but i was thinking of sending to my local honda dealer and having the motor completely done so thats a new cam, port and polish, piston, valves, and the big bore kit but i dont know how much it will cost me and the dealer wont give me an estimate until hes done.

bwamos
10-24-2005, 01:43 PM
The local dealer is gonna rob you blind.

You'll be MUCH better off sending it off to FST or Sparks to get it done. You'll get a better motor and it will cost you about 1/4 as much.

bwamos
10-24-2005, 01:45 PM
Also, honestly, for the price of a 330 kit.

Sell the 300ex.. and buy a used 400ex in good shape that's already built up.

You'll spend about the same amount in the end, and have a much faster quad.

A full blown 330 kit with cam, valves, porting, etc, etc.... is gonna run you about $1000-1500 depending on the amount of work you have done. If you have a stock pipe/filter add another $300-400

MX wannabe
10-24-2005, 02:13 PM
ok then thanks for the info i will try and sell mine for what i can get for it which will prbly be around 2000-3000 if im lucky. cause i live in quebec so i dont think i will be able to get that much for it then try to buy a used 400 thanks

MX wannabe
10-24-2005, 02:17 PM
Bwamos approx how much did it cost you to modify your 300ex to what it is now and why didnt you just buy a 400ex if you dont mind me asking....thanks