blaster problem, please help.

[chris400]

i just put a new throttle on my blaster, and whenever i kick it it idles for about a second then dies. sometimes when i kick it, it idles for a while then when you go to give it gas, it bogs down.

i dont know whats going on, please help me and tell me if i did something wrong.

[Blaster x]

Did it run before when you had the other throttle cable?

[chris400]

yes

[Blaster x]

Maybe you put it on wrong...if not try cleaning ur carb

[jesshamner]

Try checking the TORS thing on top of the carb. Make sure that its all connected right and that the throttle is adjusted properly.

[2FIFTYR]

could be many things wrong with it try checking for any air leaks after the carb, make sure the intake boot is tight. make sure you screwed your cap on right. check the TORS as stated before and check your oil line if you still have oil injection. if you forgot to put the oil line back on it will not have any lube and can seize the motor. also did you move the needle at all when you changed the t cable? did you change the t cable going from the tors to the slide? if so make sure your needle is sitting correctly in the main jet.

[Blue250X]

my 250x did this, but not really. You would kick it and it would rev like a mother, but you lut the clutch out, veen in neutral, and it dies. I just adjusted the hrottle cable, and tadaa, fixed.

[ny300exrider]

he got it fixed, told me it was something electrical or something that he forgot to hook up.

[chris400]

yeah fixed it. hahaha

[jesshamner]

What it was dawg?