PDA

View Full Version : Mx gearing



steveatv3
10-21-2005, 07:39 AM
What you guys gear your quads for MX i am going to be placing an order for stuff to finish my rebuild and need new sprockets. and was wondering what size front and back sprockets you have with 18" rear tires.

Pappy
10-21-2005, 07:45 AM
stock gearing feels pretty sweet to me on 18's

fastrider450r
10-21-2005, 08:15 AM
yeah i think stock gearing on 18's feel good to me also...with a stock engine. i havnt tried 18's with my pipe or anything cause i race XC

Pappy
10-21-2005, 08:20 AM
i ran the smaller front sprocket with 20" XC tires, and it worked well for the woods but deffinatley put a hurt on the top end speed.

we thru on mx tires and went back tos tock along with a new exhaust and the b!tch ripped:macho

honduh440
10-21-2005, 08:58 AM
i agree stock sprocket with 18s

10-21-2005, 09:12 AM
On the 06 the gearing is 13/38
04/05 is 14/38

If i raised mine a tooth would it be the same or is the transmission set for the 13 on the 06?

jakes699
10-21-2005, 09:14 AM
raise it up bro

10-21-2005, 09:18 AM
HAHA jake are u in miss gracious's?

jakes699
10-21-2005, 09:19 AM
yup read your pms bro

ThumPIN_450R
10-21-2005, 11:52 AM
I run stock with 18's and I'm thinking of trying out a 15 tooth counter shaft sprocket.

trx450Rrider
10-21-2005, 12:39 PM
i ran 15 37 gearing with maxxis razrs for most og my race season and i LOVED IT. not much shifting and it still pulled non stop.

10-21-2005, 12:49 PM
Originally posted by trx450Rrider
i ran 15 37 gearing with maxxis razrs for most og my race season and i LOVED IT. not much shifting and it still pulled non stop.

Sounds good.. i hate shifting a lot