440ex dragger
10-17-2005, 07:45 PM
Alright guys I have a National level quad for sale, I rode it in Brashear TX at the ATVA TT national, bike runs strong and needs nothing to be a competative quad. I had a new ESR 330 topend put on at the beginning of the season and got it dynoed at 54 hp to the rear wheel. Have a chart if needed. I have just put on a brand new swaybar and clutch cable, lever and perch. I am looking to get 4500 for it or I will trade for a 450 or possibly a hybrid or a worked 400. On our off weekends we would go to a local dirt drags and this bike ran a 4.90 in 300 ft.
It has:
A 86 frame with no cracks.
ESR 330 bolt on Topend with a new 88 crank and rod ported and polished by OFR.
Topend port. The guy that ported this compared it to a 350 done by ESR and the 350 put out 2 more hp than my topend.
I had all new bearings and seals put in when I put the 330 on in June, and all the gears inspected.
I have a 40mm Kehin carb that I bought new in late 2004, so it is almost a year old now.
It has a ESR reed cage that is worth $259 with Carbon Fiber Reeds.
Curtis Sparks TT exaust that is in the bare metal finish, I was gonna get it chromed just never got around to it. I think the exaust was $325 when it was new.
It has a 18cc dome in the head and I have a spare dome that is a 17cc I think but I will check. the dome is in prefect condition I checked it after the Brashear Race.
It has +3 +1 Leager chrome a-arms.
The Swingarm was Professionally shortend by Brad Covington of Bullet Motorsports it was shortend 3 inches.
It has Durablue Lowering kits on front and rear.
I have pics that I can send if you need. I have lots of extras that come with the bike. Depending on trade or how much I get for it. Its a clean bike that needs nothing but a rider.
Zak
It has:
A 86 frame with no cracks.
ESR 330 bolt on Topend with a new 88 crank and rod ported and polished by OFR.
Topend port. The guy that ported this compared it to a 350 done by ESR and the 350 put out 2 more hp than my topend.
I had all new bearings and seals put in when I put the 330 on in June, and all the gears inspected.
I have a 40mm Kehin carb that I bought new in late 2004, so it is almost a year old now.
It has a ESR reed cage that is worth $259 with Carbon Fiber Reeds.
Curtis Sparks TT exaust that is in the bare metal finish, I was gonna get it chromed just never got around to it. I think the exaust was $325 when it was new.
It has a 18cc dome in the head and I have a spare dome that is a 17cc I think but I will check. the dome is in prefect condition I checked it after the Brashear Race.
It has +3 +1 Leager chrome a-arms.
The Swingarm was Professionally shortend by Brad Covington of Bullet Motorsports it was shortend 3 inches.
It has Durablue Lowering kits on front and rear.
I have pics that I can send if you need. I have lots of extras that come with the bike. Depending on trade or how much I get for it. Its a clean bike that needs nothing but a rider.
Zak