Sprokets???

[Phily450]

Any body Know what size front spoket has good pull and top end, Or front and rear sproket combo? I went from a 14 tooth front to a 15 and the gears feel to tall especially in 5th, im thinking of tryn a 13 tooth front, any sugestions?

Hmf slip on, Rev Box, ESR intake no airbox, 175 main, 45 pilot, yz needle 3rd clip,vp 100 octane and Cam mod...

[slofords]

If you ahve stock size tires, then a 15 will pull better than stock but you will lose top end. if you went down to an 18 inch rear tire then that gear would be great.

[maggiesboy]

Metal uses a 15/39 combo on larger tracks and it pulls really well. I run 14/36. Fairly close on ratios between the two.

[wagsracing]

I went with a 13 and it pulls great off the start and I do not lose much on top end.

[Phily450]

Thanks guys im gonna try a 13 tooth and if i dont like it i'll probably go back to stock!!:D

[metalmellinium]

I also use 15/40 on smaller tracks. I did use 15/38 for awhile worked ok.
Originally posted by maggiesboy
Metal uses a 15/39 combo on larger tracks and it pulls really well. I run 14/36. Fairly close on ratios between the two.