removed light and starter switch assembly

[QuadRacer041]

i removed my light and starter switch assembly in favor of the yz250 kill switch, to be used to start the quad of course.
pretty easy to do,i removed the assembly them opened it up to see what color wires are needed to engadge the starter.you will need the yellow with red stipe and balck with white dashes.take one end of the yz kill switxh and connect it to the yellow with red stripe and the other end and connect it to the black with white dashes.i also jumped the nuetral saftey switch so i can start the quad even in gear.for that you just jump the yellow with green stripe and the green with black dashes.thats pretty much it.

[JDiablo]

you can also hook up a killswitch to the engine stock killswitch wires

makes it look nice and clean

[JRDrider22]

you get a new quad lou?

[QuadRacer041]

Originally posted by JRDrider22
you get a new quad lou?


yea i got an 06 450r, imll be using for xc racing

still keepin the walsh for mx

[JRDrider22]

oh alright, niceeee

[UbeenSmoked]

is there anyway that i could do anything like this to a 05 450r just to get the light switch/kill switch off the handlebar, to much cluster on the handlebars

thanks

[QuadRacer041]

Originally posted by UbeenSmoked
is there anyway that i could do anything like this to a 05 450r just to get the light switch/kill switch off the handlebar, to much cluster on the handlebars

thanks


why would you want too???if you already have your light removed take the whole switch off. use your kill switch or key to turn it off and get a works clutch lever with the decompression on it.