QuadRacer041
10-14-2005, 01:40 PM
well the prm engine skid plate from an 05 fits the 06 with some slight mod's.
you will need to redrill the oild drain plug bolt hole as it seemd the location on the case is differnt.it will need to be moved over to the left side of the quad about 1 7/8" and forward towards the front of the quad about 1/4"-1/2".
the only other issue, which i havent addressed yet is the rear most mounting bolts.looks like the skid plate may need to have new holes drilled about 1/4"-1/2" inward so that the bolt holes on the mounting piece that goes on the top side of the frame, under the motor will line up.due to a gusset on the frame the mounting bracket doesnt sit where it needs to.
nothing that cant be reworked.
heres where you need to drill the drain plug hole
you will need to redrill the oild drain plug bolt hole as it seemd the location on the case is differnt.it will need to be moved over to the left side of the quad about 1 7/8" and forward towards the front of the quad about 1/4"-1/2".
the only other issue, which i havent addressed yet is the rear most mounting bolts.looks like the skid plate may need to have new holes drilled about 1/4"-1/2" inward so that the bolt holes on the mounting piece that goes on the top side of the frame, under the motor will line up.due to a gusset on the frame the mounting bracket doesnt sit where it needs to.
nothing that cant be reworked.
heres where you need to drill the drain plug hole