PDA

View Full Version : front sproket



bigmatt86
10-12-2005, 11:33 AM
what is the stock number of teeth on a 400ex front and back. i have a one tooth bigger sprocket on the back can i just drop two in the front to make it one less in the front

underpowered
10-12-2005, 12:41 PM
stock gearing is 15/38 on 99-04 models you said your gearing is 15/39. if you drop 2 teeth in front it will really lower your gearing. i tooth up front is equal to about 2-3 teeth in the rear. i you drop on tooth up front it is like adding 3 to the rear. righ now you are slightly lower gearing than stock, so if you go down 2 in the front, the bike will have a very solw top speed but tons of power. up in back=lower gearing=slower, down in back=higher gearing=faster,
up in front=higher gearing=faster, down in front=lower gearing=slower.

ommkevin
10-12-2005, 01:34 PM
15 stock

troutman561
10-12-2005, 10:44 PM
for 05,06 its 14t uo front

10-14-2005, 11:08 PM
i run a 16/36 and tghis thing pulls like hell.i love it. woooeee ride like the wind. no 450 can reach me