Tether Kill Switch

[DAXSNOW]

Could some one please tell me witch wires I wire the tether kill switch to.

[Splatter Matter]

the yfz needs a "normaly closed" switch, such as the pingle, to use the stock kill switch wires.
although I don't recomend using a normaly "open" switch, such as the pro-design, here is how to hook it up.

Follow the wires up from the oil filler plug (four wires) to just before the first connector (under the hood) the wires separate into pairs.
Pick the white/red pair and splice the longest wire out of the kill switch into the white wire and the short wire from the k/switch into the red wire.
No need to earth any wire.

(stolen from bluetraxx)(daddio)

[parkers30]

I have a Gunnar Normally closed kill switch that works great, same thing alot of the pro's are using, I want to say it was about $45

[DAXSNOW]

Thanks Splattrer Matter for the info. I have the pro design switch.
Are those instructions for it? thanks again.

[WhiteYFZ]

I got a yfz 450 and got a pro design kill switch ..if u want to do it safe go to http://www.baldwinmotorsports.com and buy the kit for 25.00so u dont got to mess with the wires.