TheFontMaster
10-09-2005, 09:50 PM
I posted this in the powertrain forum, but I'm not getting any help there, mabey I'll have better luck here.
Well I was messing with the wireing a little to get the kill switch hooked up, and I ended up not getting the kill switch hooked up, and it won't start. I spliced the kill switch into the ground wire first, and since that was the wrong way, I just replaced the ground wire so I didn't have any splices in it. Then I cut the rubb around the yellow/black wire to expose some wire because that is where I have to hook the kill switch wire into, but I did not cut through that wire. Now I am not running the stock stop switch, with the on/off, and light switches, and a kill switch was not ever wired in, and it would start and run normal even without those. I checked all the normal stuff, ground wire, it's getting gas, new plug, and I think the problem is that it isn't getting spark, but It sounds almost like it wants to start.
Well I was messing with the wireing a little to get the kill switch hooked up, and I ended up not getting the kill switch hooked up, and it won't start. I spliced the kill switch into the ground wire first, and since that was the wrong way, I just replaced the ground wire so I didn't have any splices in it. Then I cut the rubb around the yellow/black wire to expose some wire because that is where I have to hook the kill switch wire into, but I did not cut through that wire. Now I am not running the stock stop switch, with the on/off, and light switches, and a kill switch was not ever wired in, and it would start and run normal even without those. I checked all the normal stuff, ground wire, it's getting gas, new plug, and I think the problem is that it isn't getting spark, but It sounds almost like it wants to start.