450r carb on a 400ex

[jocolo]

Ok guys I got an 99 400ex with stage 1 cam, uni filter, 11:1 standar bore piston and full HMF exhaust, does anybody knows what jetting do I need?
I live in Orlando so pretty much 85 degrees and sea level
Thanks in advance

Dont want to go with a big bore

try a 42 pilot, 170 main. air skrew 2 turns out.

[jocolo]

Thanks
Jorge

[44oEX]

ehhhh for a 450R carb you'll need bigger then 42 for a pilot start with the stock and go up if you need to...and maybe a little higher on the main too

I dono, I have no experence with a 450r carb, thoes are the settings that I was using on my modded stock carb with modded engine.+

[ommkevin]

id think you would need to bore it out to use a 450r carb

[RiderTRX400ex]

do a search there are many threads on here about the same topic.

[44oEX]

Originally posted by ommkevin
id think you would need to bore it out to use a 450r carb

no works great on a stocker to

[Zuber187]

Jocolo, Hey Man Where do you live in Orlando and how is the riding over there? I live in Titusville and besides 5A and Ocala there not much over here unless you like running from the PO. I was planning on trying the 450r carb on my 04 EX Ross 10.8-1, HRC cam. Let me know how it turns out. I have heard it gives pretty good gains.

[jocolo]

I live in hunter's creek Orlando just about 5 mins from the sea world riding area, never been to ocala tou, once i get the carb i will let you know, the riding in international drive (sea world) is mostly sand with woops everywhere lots of people on the weekends usually, unfortunatly with hte airline schedule i will not have a weekend off this month but may squeeze some riding this saturday, if you come down look for a montero with a yz426 #21 and a 400ex with hotwheels graphics
Jorge