LT250Racer609
10-09-2005, 12:52 AM
1986 250R motor
has...
265cc GT Thunder ported and polished cylinder for MX
Hinson billet clutch basket
Hinson clutch springs
Hinson high friction clutch plates
billet hinson kick start
The bottom end was inspected under 8 months ago and 2nd gear along with all new seals and bushings were replaced
only 2 races on recent rebuilt top end
38 MM air stryker carb. is also included along with a chrome LRD pipe (cut and welded by GT Thunder to match the porting of the cylinder) and silencer
oil was changed every other race and coils were always checked and cleaned with electrical cleaner....motor runs very strong
asking 1100.00 or b/o...if sold for 1100.00 i will include an extra KRANT-IT ported cylinder with several bores left
has...
265cc GT Thunder ported and polished cylinder for MX
Hinson billet clutch basket
Hinson clutch springs
Hinson high friction clutch plates
billet hinson kick start
The bottom end was inspected under 8 months ago and 2nd gear along with all new seals and bushings were replaced
only 2 races on recent rebuilt top end
38 MM air stryker carb. is also included along with a chrome LRD pipe (cut and welded by GT Thunder to match the porting of the cylinder) and silencer
oil was changed every other race and coils were always checked and cleaned with electrical cleaner....motor runs very strong
asking 1100.00 or b/o...if sold for 1100.00 i will include an extra KRANT-IT ported cylinder with several bores left