PDA

View Full Version : Cheap CRF 450 Quad $3500



zawetzel13
10-06-2005, 11:35 AM
Okay, i'm desperate, I have an '04 CRF 450 Custom quad that i must sell. The quad has been wrecked and needs a new frame, also left elka shock is bent just a hair where it mounts to frame, but everything else is in good condition.
Here is a list of some of the things i can think of that are on it

motor
04 CRF450
Edelbrock carb
Yoshi full titanium exhaust (wasnt cheap)

suspension
Elka triple rate fully adj. long travel fronts
rear shock is stock
Janssen +3 a-arms and tie rods
Lonestar Swingarm
Lonestar Axle +4
Lonestar axle carrier
Lonestar axle lock nut

other
Arens Steering stem
renthal bars
AC bumper and grab bar
Fullbore plastics
Seat cover
Nerf bars
Brand new Razr's front and rear. less than 2hrs on them

So the frame is trashed and will need a new frame, but i was talking to someone on here that has a laegers crf450 frame with houser swingarm and pep cr500 shock shipped for $1500. not bad, or you could find a frame somewhere else for probably $500-$1000. not bad for someone that wants a sweet race quad for a cheap price.
I'll post some pics
and just like it says in the title,
all this for only
$3500

zawetzel13
10-06-2005, 11:38 AM
busted frame

zawetzel13
10-06-2005, 11:39 AM
again

10-06-2005, 02:29 PM
trade u my 400ex nuthing rong with it

JDiablo
10-06-2005, 02:39 PM
will you be willing to ship?

zawetzel13
10-06-2005, 03:20 PM
cant trade, I need cash.
could ship to you, or maybe meet half way, would cost a little extra though

G Impala 63n70
10-06-2005, 04:13 PM
Trade you a mint 03 cannondale and some cash? In ohio too.

zawetzel13
10-06-2005, 05:04 PM
May take trade with cash, who else has something good out there?

300excrazy98
10-06-2005, 05:05 PM
is the top of that shock bent or is that just the picture?

zawetzel13
10-06-2005, 05:09 PM
yes, it is bent, the whole front end is bent. so will need a new frame for sure, unless someone is a really good fabricator

kids on quads
10-06-2005, 05:21 PM
who built the frame? where are you located? e- mail me I am interested. kidsonquads@prodigy.net

zawetzel13
10-06-2005, 05:27 PM
The frame was built by Rowe engineering. it's no good though, i would look into buying a used aftermarket from someone. I know a guy that's got a laegers frame with cr500 link swingarm and PEP shock for $1500 shipped.

vinson581
10-06-2005, 05:51 PM
wanna just sell the motor?

kids on quads
10-06-2005, 05:57 PM
we build our own frames, i, am interested ,I need to know where you are located. e- mail me directly kidsonquads@prodigy.ney

zawetzel13
10-06-2005, 08:15 PM
might part it out, i would rather sell it whole, so let me see what i can get for it first. how much are u willing to give for the motor?

10-06-2005, 08:18 PM
how bout i trade u my engine nd i get yours

zawetzel13
10-06-2005, 08:48 PM
trade my 450 for ur 400. sure i'll jump right on that!
jk

10-07-2005, 08:04 AM
y u would still get 3000 easly for your quad.

zawetzel13
10-07-2005, 09:59 AM
anyone would be have to be on drugs to give up a 450 motor for a 400 i think

10-07-2005, 12:07 PM
how much will u sell the engine for?

zawetzel13
10-07-2005, 01:08 PM
Quad is on hold for a guy in michigan. not taking any more offers at the time.
thanks,
zane

bk92
10-09-2005, 08:52 PM
i wil giv u 2700

bk92
10-09-2005, 08:52 PM
i wil giv u 2700

bk92
10-09-2005, 08:53 PM
i will giv 2700

zawetzel13
10-11-2005, 05:41 PM
the quad is back up for sale,
bottom dollar is $3500

zawetzel13
10-12-2005, 10:46 AM
bump

muff
10-12-2005, 11:28 AM
what else is damaged other than the frame and shock?

zawetzel13
10-12-2005, 05:44 PM
that's it all else is good

yamablaster24
10-12-2005, 08:27 PM
ill give you 1200 for motor?

yamablaster24
10-13-2005, 07:52 PM
still up for trade?

JDiablo
10-13-2005, 08:04 PM
willing to part it out?

zawetzel13
10-13-2005, 09:17 PM
No, i am not willing to part out at the time. I figured up the cost of all the parts and figured they're worth at least $3500, but i would rather sell whole than part out.
now a refresher
Almost everything is in good condition.
the only problems are:

1. Needs new frame
2. pic shows slight bend in top of shock where it mounts to the frame.

also there are too many people interested in it as is for $3500 to lower the price so dont ask, but i would be willing to trade for a nice 400ex or raptor set up good.

zane

10-14-2005, 09:18 AM
well then trade me

zawetzel13
10-14-2005, 09:43 AM
what kind of a-arms and swingarm u got on that?

10-14-2005, 10:15 AM
a-arms and swing arm r stock jest diffrent colar.
everything in my sig is whats on it.

zawetzel13
10-15-2005, 07:11 PM
no thanks on that trade, i need something with aftermarket suspension.

geekuskahn6
10-15-2005, 10:22 PM
ill trade you straight up for these two
03 limited edition shee great project needs a top end rebuild
has nerfs, bandit 20 by 7 by 9 inch front wheels 20 by 11 by 9 inch razr s in the back new rear carrier bearings chain and front and rear sprockets with a dg front bumper I need to get rid of this. 2000 great shape give me an e mail address and ill send you pictures this bike is located 15 mins south of philly near the pa de border
87 250r fresh top end nerfs and propegs 3 inch wheel extensions all the way around new rear machined alluminum carrier from boss racing radiator shrouds its 20-6-9 inch front tires 18-10-8 inch rear holeshots one holds air the other doesnt painted black plastic and gas tank black seat im looking to get out of the two strokes

yamablaster24
10-15-2005, 10:33 PM
hey i got your PM your inbox is full.

Is it too late to call? Get on Aim or something

im replacing timing chain right now the stock one was a Little stretched upon inspection. Should be fixed soon though. Call me anytime 440-429-2150 ( my buddys cell) Im just waiting for a timing chain to come in to get it running Again. I know for sure it runs good though i had it running bout a week ago. Let me know ASAP

zawetzel13
10-16-2005, 09:25 AM
let me see some pics of the banshee and 250r

steveatv3
10-16-2005, 12:00 PM
would you be willing to trade for a Articat F7 Firecat?

zawetzel13
10-16-2005, 12:07 PM
Originally posted by steveatv3
would you be willing to trade for a Articat F7 Firecat?

maybe?? what year? any mods?

steveatv3
10-16-2005, 12:08 PM
its an 03 its the EFI limited edition model

zawetzel13
10-16-2005, 12:19 PM
Originally posted by steveatv3
its an 03 its the EFI limited edition model

hmm... interested. could i see a pic or 2

steveatv3
10-16-2005, 12:22 PM
ok, it has only 2,000 miles on it witch is awsome milage, i dont have it stored at my house i will be able to get you pictures later tonight.

I really like your quad and i need another project to work on, the sled has absolutly nothing wrong with it

zawetzel13
10-16-2005, 12:28 PM
sounds pretty good, do u know any website that has a sled like urs on it so i can get an idea of what exactly it is? i'm not real up on sleds

steveatv3
10-16-2005, 12:34 PM
it looks like this orange one but mine is yellow and red

zawetzel13
10-16-2005, 12:36 PM
hey, looks good. are u looking for a straight up trade? and how far are you from ohio?

steveatv3
10-16-2005, 12:37 PM
im all the way on the other side of the state, i would do a straight up trade... and would you be willing to meet someware in mid PA?

zawetzel13
10-16-2005, 12:45 PM
pm'd u

zawetzel13
10-17-2005, 10:35 PM
not sold yet

D-4our
10-18-2005, 03:22 PM
i dont have alot of money but i know a good deal when i see one, i am trying to sell a bike of my own worth about 2,500 it is an sdg speed mini with many extras if your intrested ide be willing to trade that to you for your quad and also like 500 dollors you might have better luck selling mine if you trade my mini is realy fast it beats crf 150s mine is a 107 with manual clutch 4 speed ready to be raced. i have a 400ex now and 2 freestyle ramps that are waighting to be jumped i just am trying to get the right quad setup i want your bike badly if we could make a deal that would be awsome

zawetzel13
10-18-2005, 05:25 PM
i dont have any use for a mini, and dont really want to ship to cali. thanks anyways

chriscrf
10-18-2005, 09:43 PM
I am interested in the crash bike but would like the information for the laeger chassis to go with also.
email cmyz426@att.net or cell# 706-840-4560

Thanks Chris MIller

zawetzel13
10-19-2005, 08:13 PM
quad is considered sold. if for some reason it does not sell i will repost it.
thanks
zane

steveatv3
10-22-2005, 02:07 PM
if its not sold would u be still interested in the sled, im sorry its hard for me to get pics but if ur still interested ill get the ASAP

Brewer48
10-26-2005, 06:36 PM
Trade for '05 YFZ450 that needs clutch steels/plates and swingarm pivot bolts? LMK

http://www.exriders.com/vbb/showthread.php?s=&threadid=186710