grude73
10-05-2005, 10:17 PM
I have a 2002 400ex in great shape, I want to trade for a 250r.
To save some questions, im not interested in any dirtbikes or quads older than 2000 unless its an 'r' and definately no banshees/blasters.
Heres what I have
2002 400ex
White brothers R4 pipe - polished aluminum
port matched head
+6 degree timing mod
+2 Houser A-Arms
Houser Steering Stem
Pro-Tapers
ASV unbreakable Clutch Lever
Polished Throttle Cover
Billet polished Brake Cover
DG Bumper
OMF Scoops
AC Propeg Nerfs
Factory Yellow Plastics - Race Cut Fronts - Skin Industries Graphics
Maxis Razor's all round on ITP C-Series Black powdercoated - 98%
Dubablue +4 Adjustable Axle
Full Chassis Skid
Since this picture I have completed a full freshen-up
-Nerfs & Nets are now black - Epoxy Hardened Paint
-Springs are now black
-Polished motor mounts - starter cover - oil filter cover
-New sprockets & Z-Ring DID chain
-Nac's Case Saver
-Nacs E-Brake Blockoff
-New Pads Front & Rear
-Exhaust Header Wrap
-New UMI Chain Slider
-New OEM Rear Hubs
I have not yet got the plastics back on the bike, as soon as I do I'll take some new pics.
This quad is as reliable as you could want with fairly low hours - maybe 60-70. runs very strong and has been well maintained. Everything works as expected and I have some spares to go with it.
Either post pics here or e-mail to gman@outbackshack.com
:-)
To save some questions, im not interested in any dirtbikes or quads older than 2000 unless its an 'r' and definately no banshees/blasters.
Heres what I have
2002 400ex
White brothers R4 pipe - polished aluminum
port matched head
+6 degree timing mod
+2 Houser A-Arms
Houser Steering Stem
Pro-Tapers
ASV unbreakable Clutch Lever
Polished Throttle Cover
Billet polished Brake Cover
DG Bumper
OMF Scoops
AC Propeg Nerfs
Factory Yellow Plastics - Race Cut Fronts - Skin Industries Graphics
Maxis Razor's all round on ITP C-Series Black powdercoated - 98%
Dubablue +4 Adjustable Axle
Full Chassis Skid
Since this picture I have completed a full freshen-up
-Nerfs & Nets are now black - Epoxy Hardened Paint
-Springs are now black
-Polished motor mounts - starter cover - oil filter cover
-New sprockets & Z-Ring DID chain
-Nac's Case Saver
-Nacs E-Brake Blockoff
-New Pads Front & Rear
-Exhaust Header Wrap
-New UMI Chain Slider
-New OEM Rear Hubs
I have not yet got the plastics back on the bike, as soon as I do I'll take some new pics.
This quad is as reliable as you could want with fairly low hours - maybe 60-70. runs very strong and has been well maintained. Everything works as expected and I have some spares to go with it.
Either post pics here or e-mail to gman@outbackshack.com
:-)