parting out 300ex

[hondasmith]

i have a 2000 modle 300ex that i am parting out make offer on everything

[grumpy]

Im looking for the following:
rocker box, complete
head, complete
cylinder
whole motor
front rims, minus tires(rims must be in very good condition

send prices first and your location and if you can send pics
tomm@emcs.net

[MX300ex]

shock and axle...any aftermarket

[VT250X]

I'm looking for a rear brake rotor. What shape is it in ?

Pics to realmacuser@adelphia.net

Thanks,

LM

[rm25x]

I am looking for a stock exhaust system.

[mhunt]

plastics?

[emaxxjeremy]

is this the same as listed before?
http://www.exriders.com/vbb/showthread.php?s=&threadid=184808

i am interested in the e series pipe. got any pics?

[smartazz19]

Complete plastics and rear caliper...

[hondasmith]

ok umm i dont no much about the prices but i guess i will take 450$ for the motor? and the front rims are not in to good cond. but i will take 40$ for both, plastics are no good at all, the axle brand new rad bearing carrier and swing arm i will take 400$ for, the front hubs 30$ for both, all the shocks for 60 the throtle for 25$, all 3 break calipers for 50$, the rotors are no good i dont think the rear one is ok but the front is got grooves in it, arms make offer right bottem one has small dent in it, front break lever and all break lines make offer, ummmmmm gas tank for 25$ rear tires and rims for 55$ pegs for 20$...... prices are neg.. and if you have any questions then just ask or if you want to make a package deal i will cut deals just let me no what you want

[emaxxjeremy]

so no pipe?

[hondasmith]

yes there is a pipe an white bro. e pipe but the header pipe is kinda rusty and about an inch from where it meets the slip on part it has been welded it looks like i dont no why i think it might have had a crack in it but it is aftermarket and the silencer is good but it was not that shiny so i put it on the wire wheeler and it like dulled it more but it sounds good and works good i mean some black high temp paint on the header pipe and some mothers polish on the silencer might make it come back to life and the very end of the silencer the person that had it before me didnt has a wheelie bar and the pipe scraped just a lil bit but not to bad it dont look too bad so give me an offer or it will go with the motor probly

[emaxxjeremy]

can i get pics of the pipe
jeremyh@tampabay.rr.com

[RUNMYTA]

I need an after market front bumper and the front fender arm that is welded to the frame that holds the left hand side front fender.

[Wicked450r]

Originally posted by hondasmith
yes there is a pipe an white bro. e pipe but the header pipe is kinda rusty and about an inch from where it meets the slip on part it has been welded it looks like i dont no why i think it might have had a crack in it but it is aftermarket and the silencer is good but it was not that shiny so i put it on the wire wheeler and it like dulled it more but it sounds good and works good i mean some black high temp paint on the header pipe and some mothers polish on the silencer might make it come back to life and the very end of the silencer the person that had it before me didnt has a wheelie bar and the pipe scraped just a lil bit but not to bad it dont look too bad so give me an offer or it will go with the motor probly

I would like the slip on part of the White Bros. also the reat resivor for the rear brakes if its not all cracked up shoot me a price.

[hondasmith]

ok price reduction on motor down to 400$ with everything (carb, wireing and all)

[hondasmith]

TTT

[250xTrailRider]

What do you have for rear tires? Size condition etc.

[hondasmith]

stock rear rims with 22'' razers with about half tread make offer on anything i need to get rid of this stuff

you got any aftermarket axles

[hondasmith]

no i got a stock one tho

[smartazz19]

Take $20 shipped for the rear caliper?

[hondasmith]

everything is sold sold the hole thing for 650$