ohiomotoxer
10-04-2005, 01:25 PM
We have just tested the 06. (HMF)
First off the airbox must be ditched or big holes cut in it.
Hopefully someone will cone out with something to lose the backfire screen and a better filter.
The fuel screw is D shaped and even using the trick Motion Pro 90* tool it is a pain! We are at 2.5 out.
42 to 48 pilot.
Needle is NOT ADJUSTABLE, we are getting an adjustable one for more testing as we are losing HP in the 3~6,500 RPM range.
120 to a 175 main jet with our slip on.
The 05 headpipe is different than the 06 in the first bend, but we have made change already.
As I said, we will nave an adjustable needle in a day of so and can continue testing where we can post the powercurves.
See the HMF forum under TRX450 for updates.
First off the airbox must be ditched or big holes cut in it.
Hopefully someone will cone out with something to lose the backfire screen and a better filter.
The fuel screw is D shaped and even using the trick Motion Pro 90* tool it is a pain! We are at 2.5 out.
42 to 48 pilot.
Needle is NOT ADJUSTABLE, we are getting an adjustable one for more testing as we are losing HP in the 3~6,500 RPM range.
120 to a 175 main jet with our slip on.
The 05 headpipe is different than the 06 in the first bend, but we have made change already.
As I said, we will nave an adjustable needle in a day of so and can continue testing where we can post the powercurves.
See the HMF forum under TRX450 for updates.