this will sound stupid but.....

[sportraxrider10]

how do i change my main jet, i think i need at 130, but i'm not sure

[sportraxrider10]

and where can i get it, or what do i need

[Blake24]

well iam no expert on re jetting but i know you can get them from your local honda dealer.............a expert can help you on actual jetting procedure

[Z-King]

all you have to do is take the bowl off your carb and in the middle of your carb there is a screw it will have a number on it then you just go to moto-man.com and buy jets for it and replace it they run abought 35-50 dollers for a kit

[airheadedduner]

I don't think u have to take the bowl off. I am not sure about the EX but on the R there is a plug in the bowl and thats all you got to take out. I can change the main in my R in a min.

[spliffy]

Yep There Should Be A Big Nut On The Bottom Of The Bowl You Can Take Off & Reach The Main.... As Far As Buying Jets Go , Just Go To Any Honda Or Even Most Atv/Snowmobile Dealers (polaris,yamaha,suzuki) Most Of Them Will Have Mains & Pilots For Keihen Carbs They Run About $4 - $5 Each. It Wouldn't Hurt To Spend $30 & Get Yourself A Clymer Manual For Your Quad.... They Really Help Out ALOT. :)

they run around $2 here, and there is a big nut like screw on the bowl that you take off and take the mni out and put a new one on, then put hte screw back on, takes about a min.