Oil Cooler For 300ex?

[2k2-300exnj]

i know that fst makes one but how much, good quality?, and i have also seen another type of oil koolers on a 250x which is basicaly the same thing i think it was a jagg or something how are they? thanks for all the help

also since the motor is running cooler i know there will be a better performance but will i actually gain any HP?
P.S. i am getting works with rezzies saturday will the oil cooler work with them since they are mounted on the frame rails up front because from the pix i have seen that is where the oil cooler mounts

i heard jagg is suppose to be good, but i wounldn't waste my money on one of those unless i was boreing out my quad.

[R-Crazy]

i have the FST. love it.

dave

[2k2-300exnj]

i probrably wont be getting a bore kit for a while but i am always looking for more power and i also ride pretty hard and all day straight through from like 7:30am through like 8:30pm

[01TRX300EX]

You won't get more power from it, you will just be able to keep the power you have longer.

[Rastus]

Yes, it will help alot when its a hot day, and your riding all day.
Heat on a fourstroke = decreased power.
Theres a sweet shpot for too much cooling, and too little.
But,i have heated up pretty good, and lost a good bit of "ummphh". Its still there, just the engine gets hot. The coolers would also help with an aftermarket cam, and rockers.

Overall, i think it would be a good buy.

[2k2-300exnj]

ok but how much and whatis better or are they pretty much the same, jagg or FST?

[R-Crazy]

my FST was 100 bucks. well worth it

dave

[Rastus]

I think FST is alittle cheaper than JAGG, im not sure though.

[wht_blue_300ex]

hey guys,
i have a 1993 honda 300ex its bored 75 over, i piped it, and i have a k&n. but what i'm asking do you think it would be a good idea to get a oil cooler for my quad.

[kicken250x]

i have thought about getting one my self but im just woried about when i get out the pressure washer to wash it will that mess up the fins??? i know it does on radiators but what about this? did you have any trouble installing it? i know that the oil comes out/goes in the oil filter cover i think but where is the other hose go to?? thanks

[stocktires]

I've heard there hard to install and yes a pressure washer will screw up the cooler, the cooler is a oil radiator. Its a radiator, it radiats the oil, not coolant

back when I had a 250x I figured out that you could use a 350x oil cooler on it. the oil filter cover has one line on it so that will bolt on, the other you have to drill the case. I think the 300ex has the spot on the case also below the filter where the line goes. its a matter of if you want to drill it or not. of course I think you have to drill into the motor with the other kits also. and yes those kits are using a common cooler that has soft fins, not near as tuff as the honda stuff.

[deansfastway]

Yeah these coolers will help you out Espescially if you ride in sand pits(noticed NJ) The oil comesback to the motor near the sump .It is a worthwhile investment espescially with a modded motor. I have also made air spoilers to direct air to your topend . These are the cheapest way to cool it down. On 400s you can feel the difference with the spoilers the motor is much cooler.

[sportraxrider10]

does FST have a website or where can i get the oil cooler?

[kicken250x]

yea i was wondering that too

how long did it take to install that and was it hard?
killer
looks like a good investment