Swingarm swap???

[motochris]

Has anyone ever done a swingarm swap from a honda 200x to a 250x or 300ex??? Whats involved with this swap and mods??? Is a 3 wheeler swingarm longer??? How much longer??? Can i still use a stock ex shock??? Thanks for the help.

[TRX250EXER]

Ive done a swap between a 250x and a 300ex but never with a 3 wheeler! shouldn't be much difference.

["BLAHH"300!!]

....not sure about the 200x 3wheeler, but
the 350x and 300ex can be swapped. the 350x swingarm is a little narrower, if you put spacer's at the pivot bolt it will work.
you do need the 350x rear shock, or an aftermarket rear shock to fit the 350x. the 350x shock uses a linkage...the 350x swingarm is about 1 inch longer than the 300ex is. all this will work on the 250x and the 300ex
as far as the carrier and axel's go, i'm not too sure. i've heard they were the same, and heard they were differant.

i havn't heard anything about swapping a 200x though.

[Yoshi400ex]

wat about a 250ex

[cdalejef]

A 250ex is shaft drive, it won't even come close!

[Yoshi400ex]

sorry i ment a-arms