View Full Version : spare motor
250r rider 88
09-26-2005, 06:24 PM
anyone have ablown or project motor that they want to get rid off looking for something to do this winter want to build a 265 or bigger let me know if you have anything
LT250Racer609
09-26-2005, 09:23 PM
i have a cylinder that needs to be resleeved but i dont have any bottom ends
baker250r
09-27-2005, 03:58 PM
I have a bottom end and a cylinder. The bottom end has a crack in the left case half from the frame flexing too much, and the cylinder just needs to be honed and needs a new piston. the cylinder is a 265 with a kick ace port job, and the cylinder is decked too, runs aroun 200 psi. the bottom end just needs to be tig welded, and it has a hinson clutch backet, and a new clutch kit was installed this spring its a 86 short rod motor, and cylinder. I cna also throw in a stock reed cage with boysen reeds, and a reed cage spacer..... 300 for everything?
Mechanix311
09-27-2005, 09:51 PM
i would like your engine baker250r. Let me know if you still have it.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.