PDA

View Full Version : 465 dyno



DAVE14
09-24-2005, 08:39 AM
does anyone know the typical dyno results for a totally done 465 ex would be what compression the kits come as etc. I havent got a rev kit yet but intend to ,I could probably sacrifice quick revving ability for loads of torque playing in the woods etc. but love to go wide open on dirt roads I sometimes change my front sprocket on some rides (major hill climbs)between 14 &15 tooth Ive tried a 13 massive torque but too slow .
Also should a 465 be balanced for possible case failure because it will be redlining quite a bit,I know you cant have it all but would like to try.

EPDP99
09-24-2005, 01:20 PM
my 465 on the dyno made 52 hp and 38lb-tq. That I heard is really good but it was with hardened cam and stock rockers so my head needs a complete reworking. 12:1 comp je superlite, web 450/451 grind(geat low and mid)(only made power until about 6500 rpm so rev wasnt a concern) carillo rod, fcr 41mm carb, big gun rev. I had the rev since it was stock and kept it on when I did the stroker. Yes get it balanced. Its alot cheaper to do it yourself as I learned the hard way and ended up using a crappy builder.

TRXRacer1
09-25-2005, 05:56 AM
Originally posted by EPDP99
my 465 on the dyno made 52 hp and 38lb-tq. That I heard is really good but it was with hardened cam and stock rockers so my head needs a complete reworking. 12:1 comp je superlite, web 450/451 grind(geat low and mid)(only made power until about 6500 rpm so rev wasnt a concern) carillo rod, fcr 41mm carb, big gun rev. I had the rev since it was stock and kept it on when I did the stroker. Yes get it balanced. Its alot cheaper to do it yourself as I learned the hard way and ended up using a crappy builder.
How about posting this dyno for us?

EPDP99
09-26-2005, 11:31 AM
Ill do what I can. It has been posted on here before but I just moved so which box its in I couldnt tell you.

panteramatt
09-27-2005, 01:51 PM
52 hp seems a tad bit high. I have a 500 stroker and I dont think mines even at 50 hp.

EPDP99
09-27-2005, 06:01 PM
I dont know what to tell you but i have dyno sheet but its in a box somewhere. Once i get settled ill try to find it.

TRXRacer1
09-27-2005, 08:10 PM
I'm assuming this is a corrected number?