E series pro meg

[2001300exguy]

Dopes this pipe make good power, if so do u think it would be better than hmf or sparks. it looks like it would flow better tahn any otehr pipe because of the bigger header diameter and the huge part right b4 the silencer

[crazyatvn]

I have the Pro-Meg pipe and it made great power. In a test of full pipe's (along time ago) it was one of the top pipes. I have had good luck with it, it is not that loud compared to HMF pipes. But alot of people on here do not like it. I think the Sparks X-6 is a good pipe too. My buddy had one and it was a good pipe. Louder than my E-series.

[underpowered]

the e-series promeg is the top contender as far as horsepower ratings go in many pipe comparos, but the mounting brackets are know to break and well as the pipe itself where it comes into the canister. i would say go with an X-6 or full HMF. both are built very well and create good HP numbers. But numbers arent everything, it is the curve, the promeg has a peaky curve where the HMF is a smooth power.

[2001300exguy]

well im looking for a low end pipe and something that will work good with my 416 im hoping to put in this winter

[JR3]

A good low end pipe that will respond good to a worked engine would be a TC exhaust. What are u ridin trails track cause that could depend to.

[2001300exguy]

pretty much all trails

[underpowered]

my HMF adds alot of low end. the TC pipe is usually more of a track pipe so i would say HMF for the woods.

[400ex28]

a TC will give you monsterous low end, I know i love mine, but if your into the trails thing i would get an HMF

[2001300exguy]

would an x-4 work good on a 416 or does the x6 make that much more power. theres an x4 on ebay(# 4578163071 ) thats in good shape could use a coat of heat paint though but if its not going to make more power than what i have now

i have a procircuit head pipe and an r-4 off a yz250f. it makes good power but one of the mounts is held on by a zip tie and it rattle real bad

[cals400ex]

the x-4 and the full HMF both make good power. i would get either of these over the promeg WB. however, that pipe isn't all that bad. the x-6 will out rev them all and like high rpms.