300ex73
09-23-2005, 07:27 AM
I'm trying to sell my new Burgard 300EX +4 LT arms. They're not even 2 months old yet, and in very good condition. These will also come with the extended tie rods(chrome).
This setup uses a 16.5 inch length shock. This means that shocks for a 450R, YFZ450, or 05 and up Z400 can be rebuilt to work for this setup. They can also accept 250R or 400EX length shocks, although it may not be as easy to attain the correct ride height.
The arms also use an integrated ball joint. The balljoints feature grease fittings, and can be disassembled for servicing. The upper arms use a heim joint, to make them caster and camber adjustable. However, if you buy these, the caster and camber will be set to the recommended specs.
I recently spent a little over $750 for this setup, and was on a wait for about 2-3 months. Considering they are now used and the powdercoat does have some small knicks, I'm going to be asking for $650 + shipping.
If there are any questions, feel free to ask.
This setup uses a 16.5 inch length shock. This means that shocks for a 450R, YFZ450, or 05 and up Z400 can be rebuilt to work for this setup. They can also accept 250R or 400EX length shocks, although it may not be as easy to attain the correct ride height.
The arms also use an integrated ball joint. The balljoints feature grease fittings, and can be disassembled for servicing. The upper arms use a heim joint, to make them caster and camber adjustable. However, if you buy these, the caster and camber will be set to the recommended specs.
I recently spent a little over $750 for this setup, and was on a wait for about 2-3 months. Considering they are now used and the powdercoat does have some small knicks, I'm going to be asking for $650 + shipping.
If there are any questions, feel free to ask.